Misc colt hatch body and interior parts

89Mirageman · PostPosted: Wed Feb 08, 2012 10:20 am

Well it looks like I have completely lost interest in the colt since I picked up the Summit wagon. I just don't see it going back together and I have already sold quite a few parts off of it so far. If you need anything for the body or interior just let me know. I can get some pics up but to be honest its basically just a bare shell. I will even sell rockers or quarters if some of you guys up in the rust belt feel like tackling a huge project.

The car does have a clean title but there is no way to actually roll it so it would have to leave on a trailer or roll back. Honestly its only good for parts IMO.

Both fenders $30 each
Doors $30 each
hatch $50
Hood $50
na steering column $25
metal trim under headlights $20
gas door $5
folding pass side mirror with lever for inner adjustment $15

Again if you need any body parts that don't bolt on (rockers, quarters, radiator support etc.) my brother has a plasma cutter. This car is 100% rust free and the under carriage looks perfect. Once I sell off most of this stuff it will be scrapped

. I need to build my shelter/shop and its in the way now.

Red Sleeper · PostPosted: Wed Feb 08, 2012 11:10 am

What rear bumper? Gt style?????

89Mirageman · PostPosted: Wed Feb 08, 2012 12:29 pm

Just the regular black one from the base model cars.

Flying Eagle · PostPosted: Wed Feb 08, 2012 12:35 pm

Are the supports/glue still intact that hold the hood together? Mine have all let loose.
Front fenders are dent free?

I am sorely in need of a non-dented hood with glue intact and some rust free fenders.

I will take them, they are not time sensitive so USPS or DHL or whomever can deliver a large box or pair of boxes on the cheap would be preferred.
Any thoughts on shipping, I know you've been around the shipping world a bit more than me in that regard.
Last item I had shipping a great distance was a bumper via Coltixim out of France, this should be much cheaper.

MattGSR · PostPosted: Wed Feb 08, 2012 12:51 pm

what color are the fenders and door, need the drivers side fender and door? any idea on shipping cost to CA 94568
thanks

89Mirageman · PostPosted: Wed Feb 08, 2012 1:14 pm

The car is white from the factory and the doors/fenders have small primer spots on them (fixed some small dings). It was a week away from a fresh paint job at school before the stock 4 speed trans went out. I just looked and the glue on the hood is hard and brittle like most are I'm assuming. Honestly I'm betting shipping will be way more than its even worth to Canada. We no longer have DHL here in the states and its too big to go USPS. Fedex would be our best bet but again, very expensive I'm sure.

slowdsm · PostPosted: Wed Feb 08, 2012 2:09 pm

http://www.4g61t.org/forum/viewtopic.php?f=64&t=31141

is this the car u are parting? if so I want the dash and gauge bezel..shoot me a price. (might be a week or 2 but i really need these)

cheaptalon · PostPosted: Wed Feb 08, 2012 2:49 pm

Does the hatch have defrost lines?

89Mirageman · PostPosted: Wed Feb 08, 2012 3:34 pm

Dash and bezel have been gone. No rear defroster on the hatch glass.

Flying Eagle · PostPosted: Wed Feb 08, 2012 7:07 pm

Well, seeing as how my hood still stays in place, my next most pressing set of parts would be rear well arches via the plasma cutter I recon. MattGSR could probably use the driver side stuff more than me, so pop that off to him if he needs it. The bolt on parts are my least to worry about, because my rear fenders and inner wheel well areas are in need of some serious attention. What sort of option would there be to remove and pack for those two items? UPS and FEDEX are like the devil over here because of what they charge in lawyer fees and related stuff; shady business practices IMO. Could things be sent on a pallet? I can have stuff sent to my work or even pick up at a warehouse location in Ottawa no problem. Just trying to think of a way to save my cars ass end as aftermarket seems non existent in regards to body panels. This is about the only way to get these parts and get rust free cuts as well.
Chat me up via PM cause you need this area for sales.

aaronsbig16g · PostPosted: Fri Feb 10, 2012 4:23 am

I'll take the passenger mirror.

Flying Eagle · PostPosted: Tue Feb 14, 2012 6:26 pm

Well if this were an option and down the road, it may work BUT I am on the lookout for another job. As such this puts a hold on things for the foreseeable future.

89Mirageman · PostPosted: Tue Feb 14, 2012 10:27 pm

No problem Tim. If it gets to the point where I scrap it I'll cut them out and hold them for you.

89Mirageman · PostPosted: Mon Apr 02, 2012 12:20 pm

The shell is still here but so is the nice weather so I'd like to start on my shelter. In other words, if you want something throw me a decent offer and its yours before it goes to the scrapper.

89Mirageman · PostPosted: Tue Apr 17, 2012 9:17 am

Car has been crushed

4g61t.org

Misc colt hatch body and interior parts

Who is online