4g61t.org

I totally forgot that I had some spare axles laying around... I don't remember how to identify them anymore but I did clean them up and inspect them. All boots and bands are great condition, splines are good, threads are good, I would rather have money though.



im not sure which part is DSM and which part is CSM anymore, but the buyer will only be getting the CSM stuff after I do identify it.

$175 plus shipping. Paypal verified and all that good stuff.

~

_________________
No colors anywhere, I want them painted Black.

The center one is an awd intermediate shaft. The hanger bracket is facing the trans

_________________
_____________________
1993 single turbo supra
2000 Lexus sc300
2016 ram 1500

Ill take the csm turbo axels once identified if thats what they are

_________________
1991 Mirage Se hatch, 4g63t. Rust.

ok I know you can use the DSM I-shaft with a little finesse of the seals but I need someone to chip in and confirm what exactly.
Also, I would like some verified lengths of csm axles as well, hopefully with the same style of pictures and a tape measure...

I am 99.9999% sure the outers are CSM, but I want to be 100% before I sell them to anyone. sorry to those that PM'd me

check the end that goes into the spindle.. it looks like the outer ones have a smaller diam than the center.. so I assume the outers are csm's.




Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.

ok then, so the outers are for sale

_________________
No colors anywhere, I want them painted Black.

Some close ups of the upper and lower axles from the above pics, these two are slightly smaller at the hub than the DSM one in the middle.

ok wtf is wrong with converting from my phone to photobucket to here? its like I am using a 1MP camera when my HTC Inspire is supposed to be closer to 8MP...

_________________
No colors anywhere, I want them painted Black.

sold and shipped, thanks!