4g61t.org

I pulkled the heat shield off as I am preparing for replacing the head gasket..well right in the middle the manny has a 4" crack running down it.... if there a place I can get a new one..or a header?..thanks much..

Steve < now has a 89 and 90 colt

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.

Junkyards are your friend.

_________________
91 GSX - 511fwhp and 352 lb/ft 25psi 110 octane, 7.68 @ 95.9mph 1/8th 21psi 91 octane, 11.93 @ 112.9mph, 117.7mph best trap speed, 20psi 91 octane
98 Volvo S70 T5 - DD

http://www.facebook.com/captaintonus

Junkyards full of Scoupe that have tubular manifolds, or any CSM left without a crack in the manifold. Ebay will almost guaranteed have a manifold, brand new for the $80 US range, plus shipping.

Edit: searched and found this, not even worth putting on an old part for the price. http://cgi.ebay.com/ebaymotors/EXHAUST- ... dZViewItem

I heard on another forum that the header that Pacesetter makes for the 84-87 CRX Si 1.6 will fit our motors are are FAIRLY priced. You might want to check that out unless you're looking for a factory piece, then you might want to try EBay.

so we called pacesetters today from the shop I work at.. the guy actually said he used the gasket to see if it matched up and it does not...so im not sure if that guy modified the honda 1 to make it work... anyways..

what years scoup can I use? same as the csm? 88-90?...

all the ones I see on e-bay (quick search and fast looks).. showed a 87-89...then 91/92... no 90s? not sure why theres no listings for a 90?..

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.

hey guys, what other manifold can fit the colt HB 92 w/auto transmission ? I have the same cracked manifold, I call carparts on e-bay but they do not ship to canada ! bump !

Thanks for the info.

Hey flying eagle you said you have one manifold sitting in your garage, do u still have it ? I am going to montreal the longweekend maybe I can see if I go to Ottawa to pick it up, please let me know.