4g61t.org

I’m parting out my 91’ Mirage project. All parts include shipping and pay-pal fees unless noted.

*Engine- Stock rebuild with new seals, gaskets, bearings. Cometic MLS head gasket, ARP head studs. Evo 8 hollow cams, Skunk2 cam gears. AMS machined balance shaft delete kit. New water pump, new timing belt. Roughly 300 miles on engine. $1100, (does not include shipping or pay-pal fees).

*F.I.C. 750cc injectors. $200

*Black aftermarket seats. Brand unknown. Back tilts, and sliders are included. $250 (does not include shipping and pay-pal fees).

*Apexi SAFC Select. European version, seems to have more tuneability w/ more allowances for rpm settings. $225

*Custom aluminum fuel cell. Quite large, like 20 gallons. Has a roll over valve inside and gas cap. Mirage fuel level gauge and custom sending unit. $100 (does not include shipping and paypal)

*Colt GT half shafts. $200

*Audi 100 radiator. Fits perfect in Galant VR4’s where the AC condenser was also for a Mirage with some cutting. $100

*Custom Mirage 4G63 motor mounds and trans mount. Trans mount is for a FWD dsm trans. $100

*FWD dsm trans. Not 100% on condition. Only drove at low speeds and it worked perfect. Shifted great. Never got to launched it. $200 (does not include shipping or paypal).

*ACT 2600 disc only has a couple miles w/ no launches. PP has a couple hundred miles with a few launches. $175

*Fidanza aluminum FWD flywheel. Great shape. $175

*Eprom ECU. $175

*Greddy style BOV. Bought from a friend who said the internals are real greddy parts. No proof though. $40







Call or text 920-420-4133. Leave a message if I don’t answer.

Sorry it took so long, but heres the info on the turbo. part # 300-5031. Heres a link to the website. http://www.precisionturbo.net/small-fra ... argers.php

Original add has been updated, sold items have been removed so if its listed its still avialable.

Can you post more pics of intercooler and intake / air box? How much cutting was required to fit the front mount? Thanks!

Ill get pics up tonight. The entire bumper support was cut out between the brackets that bolt in. and some trimming was done on the core support. Ill post pics of everything. Thanks for the interest.

FMIC kit is sold.

Pics of the intake and airbox.

Mirage shell is sold.

Bumpity bump..

What turbo is for sale? Little one or big 'precision' one?
And how much?

E

_________________
"life without God is like an unsharpened pencil. It's got NO point"

That's a 50 trim, T04E, with a Mitsu bolt-on housing.

_________________
91 GSX - 511fwhp and 352 lb/ft 25psi 110 octane, 7.68 @ 95.9mph 1/8th 21psi 91 octane, 11.93 @ 112.9mph, 117.7mph best trap speed, 20psi 91 octane
98 Volvo S70 T5 - DD

http://www.facebook.com/captaintonus

The turbo's been sold. When I sell parts I delete it from the main list.

Plenty of parts still available. Somebody needs some Colt GT half shafts! Or a custom airbox/intake.

I need the Driver side alxe/half shaft, are you willing to separate?

I'd rather keep the half shafts together.

Hey code we just spoke. The flywheel is 6bolt for those wondering

Curious about the AWD tranny if you have any info.

Thanks