4g61t.org

Specializing in the 3g CSM
It is currently Thu Oct 30, 2025 5:52 pm

All times are UTC-05:00




Post new topic  Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Thu Jan 04, 2007 11:54 am 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Sun Jan 27, 2002 7:00 pm
Posts: 256
Location: The Rock, New York
I'm having issues getting the passenger side axle to stay in place. Can anyone help me out?

_________________
89' Mirage Turbo
My hatch is better than yours


Top
   
 Post subject:
PostPosted: Thu Jan 04, 2007 1:31 pm 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2142
Location: Tucson Az
try a welder.. or give us more info on what its doing? either way works great

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Top
   
 Post subject:
PostPosted: Thu Jan 04, 2007 2:27 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Wed Aug 09, 2006 3:04 am
Posts: 314
Location: Cleveland,OH
I am assumimng you are trying to put a non-equal lenght half shaft into a AWD trans. I am pretty sure that the AWD side gear does not have a groove cut into it to catch the C-clip. You will need to run the two piece half shaft(equal lenght). I also got a trick from PTTcolt that to bolt the halfshaft to the back of the block without the A/C plate that goes under it. Use two 6bolt head bolt washers under each bolt (4 total). Worked great in my car for a year.

_________________
89 Colt GT, T4 T61, 2.0L, .
http://videos.streetfire.net/search/...3300fc1b2f.htm
04 SRT-4, 3inch exhaust, Intake, Stage 2 W/toys
87 Conquest TSi, Coilover, huge sways
01 Dodge 2500 4wd cummins (tow rig)
91 Suzuki Samurai (Rock Crawler)


Top
   
 Post subject:
PostPosted: Thu Jan 04, 2007 3:13 pm 
Offline
CSM Expert
User avatar

Joined: Sat Nov 03, 2001 7:00 pm
Posts: 2187
It pops out of the transmission constantly? I have 1G and 2G AWD trannies in my car and never had any problems with an 89 Mirage Turbo passenger axle. I had a problem of it constantly popping out and I believe it was due to not having a 1.6L turbo axle. See my "4G63 Swap" link on my webpage, at the bottom. Shows the axle differences.

What problem are you having?


Top
   
 Post subject:
PostPosted: Thu Jan 04, 2007 9:26 pm 
If you need the equal length halfshaft assembly let me know cause i just pulled them. They look to be remanufactured too :o

-bit


Top
   
 Post subject:
PostPosted: Fri Jan 05, 2007 4:09 pm 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Sun Jan 27, 2002 7:00 pm
Posts: 256
Location: The Rock, New York
Its working now, I think hopefully it wont pop out:/

_________________
89' Mirage Turbo
My hatch is better than yours


Top
   
 Post subject:
PostPosted: Wed Jan 10, 2007 5:34 pm 
Offline
Some call me a god

Joined: Mon Jul 12, 2004 2:45 pm
Posts: 2158
Location: All over SW Asia
Quote:
I am assumimng you are trying to put a non-equal lenght half shaft into a AWD trans.
Equal length 1G is for the drivers side.

He is referring to the passenger side and should use the 1.6T axle on
that side

_________________
Geoff
2013 Genesis 5.0 RSPEC
88 Mazda Turbo II- LSX7
89 2.0 Turbo Colt
13 Ducati 1199 Panigale


Top
   
PostPosted: Wed Jan 10, 2007 5:36 pm 
Offline
Some call me a god

Joined: Mon Jul 12, 2004 2:45 pm
Posts: 2158
Location: All over SW Asia
Quote:
I'm having issues getting the passenger side axle to stay in place. Can anyone help me out?
Is it a 1.6T axle? There should be no reason why the axle would pop out of the hub assembly or tranny. Is the axle popping out of its' cups?

_________________
Geoff
2013 Genesis 5.0 RSPEC
88 Mazda Turbo II- LSX7
89 2.0 Turbo Colt
13 Ducati 1199 Panigale


Top
   
 Post subject:
PostPosted: Wed Jan 10, 2007 9:34 pm 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Sun Jan 27, 2002 7:00 pm
Posts: 256
Location: The Rock, New York
I got both axles in, but theyre both 4g61t axles should I expect problems

_________________
89' Mirage Turbo
My hatch is better than yours


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited