4g61t.org
http://www.4g61t.org/forum/

My motor build.
http://www.4g61t.org/forum/viewtopic.php?f=9&t=29734		 Page 1 of 1
Author:  92colt72k [ Thu Jun 18, 2009 6:24 pm ]
Post subject:  My motor build.
Ok time to let the cat out of the bag. I am going to be building a new motor for my 91 Eagle talon. Evo 9 pistons and 1g big rod's I been reading and reading I don't see why I won't stick with stock mitsu parts in the block. There are a few good records Mike Rizzotti 10.462 in the 1/4 and his mph record is 138 I seen it on dsm talk. On stock block. So That's what the plan is. I am going to go with E85 on the fuel setup . Bosch 044 I mean I just don't feel like going in to detail on the hole setup but if it does not atleast make it into the 10's I don't know why I built it.

I took a few pic's of the evo 9 pistons on the rods and the 1g dsm pistons. I couldn't belive how much smaller the evo 9 rods are to the dsm 1g rods.

Image
evo 9 piston
Image
evo 9
Image
evo 9
Image
dsm on the left evo 9 on the right
Image
dsm on the left evo 9 on the right
Image
Mitsu made the rods right the first time around.

Tyler,
Author:  Johnny_B. [ Thu Jun 18, 2009 6:37 pm ]
Post subject:  Re: My motor build.
Less weight the quicker the motor can build rpm's. Smaller rod's equal less weight but also less strength, guess its a trade off.

-John
Author:  92colt72k [ Thu Jun 18, 2009 6:43 pm ]
Post subject:  Re: My motor build.
Motor Build

Arp,main.rod,L-19 Headstuds
1g dsm rods,evo 9 forged pistons stock polished crank, (Rotating assmbley balanced)
Stock Rebuild head
O-Ringed. BC springs and retainers/BC 280 cams
Kigglys HLA regulator
FHR Intake mainfold

Fuel system,
Bosch 044 pumo
Custom sending unit for the pump.
6 an fuel lines
AeroMotive FPR
FIC 1350cc INJ's

There is more but thats basicly the big part's to the built.

Tyler,
Author:  92colt72k [ Thu Jun 18, 2009 6:43 pm ]
Post subject:  Re: My motor build.
Yes I guess it is. But not a trade off I would want.

Tyler,
Author:  OLDSCHOOLKID [ Sat Jun 20, 2009 12:04 pm ]
Post subject:  Re: My motor build.
What turbo and manifold set up are you planning to run?
if you don’t mine me asking
Author:  89D15CRX [ Sat Jun 20, 2009 12:58 pm ]
Post subject:  Re: My motor build.
So much for the days of turboing a NA motor huh Tyler... :lol:
Author:  92colt72k [ Sun Jun 21, 2009 12:05 pm ]
Post subject:  Re: My motor build.
It's a 2g exhaust mainfold with has a flange for a tial 38mm wg. I am also runing a old school bulleye 60trim turbo dsm flanged.
Author:  92colt72k [ Sun Jun 21, 2009 1:03 pm ]
Post subject:  Re: My motor build.
Colt is geting sold. It is going to a great friend of mine. He is also the guy that got me into dsm's. Basicly he took me under his wing and showed me the ropes. He plans to put a built motor in it and somthing line a 16g and conv. it to awd. So this setup I am building is going in the talon. I will not reach my power goals with the 60trim but it will work for now.

Tyler,
Author:  92colt72k [ Tue Jun 23, 2009 8:41 pm ]
Post subject:  Re: My motor build.
Lol sorry I didnt catch that but yes so much for the days of turboing the na. It worked out nicely just selling off the colt to help pay for some more stuff for the talon.

Today I took the block to cae motors to have it decked cleaned and checked. I also took the head as well to be cleaned decked new valve guides and seals. Along with him installing the bc valve springs and retainers.

Tyler,
Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/