4g61t.org
http://www.4g61t.org/forum/

1slowcsm
http://www.4g61t.org/forum/viewtopic.php?f=9&t=25975		 Page 1 of 2
Author:  1slowcsm [ Mon Aug 04, 2008 11:38 am ]
Post subject:  1slowcsm
Ok so i have been here for a little bit, asking some dumb questions here and there. Never got around to taking any pics until the other day when i decided after 4 months to put my engine in the colt.

Here's a list of the mods i can thing of

89 Colt GT

6bolt 4g63
arias pistons
eagle hbeams
remanufactured mitsu crank balanced and all that good crap
i think ACL bearings all the way around
arp head/rod bolts
cometic HG
stage V head
Ferea valvetrain (1mm oversized springs and titanium retainers)
reground mitsu cams (280's)
fidanza cam gears
venom intake mani
HKS t4 exhaust mani
ITS SH60 dual ball bearing t4 turbo
HKS 50mm racegate
90 FWD tranny
SBR limited slip
Fidanza 8lbs flywheel
act 2600
DSM Link
90 EProm
GM maft
12gal RCI fuel cell
wally 255 high flow
-6an fuel lines
pte 880's
venom fuel rail
aeromotive FPR
custom 3inch dp
4inch exhaust in the making (not cause i need it, just cause i can)
budget suspension

I think that is most of it....still need fmic, radiator and some other little things to run. And i need a hood :wink:


Image

Image

Image


[/url]
Author:  turbomirage89 [ Mon Aug 04, 2008 12:01 pm ]
Post subject: 
:o Nice man, looks intense. What kind of numbers are you looking for? And that HKS manifold is badass... :twisted:
Author:  CaptainTonus [ Mon Aug 04, 2008 12:20 pm ]
Post subject: 
Damn, looks good. That will get you plenty of wheelspin.
Author:  1slowcsm [ Mon Aug 04, 2008 12:31 pm ]
Post subject: 
well orignally my hope was mid-low 10's....but im going to need some bad ass slicks. Biggest ones i can find :-p and yes for $400 manifold it better be bad ass :P
Author:  TrevTec [ Mon Aug 04, 2008 5:52 pm ]
Post subject: 
Damn, $400 is alot for an HKS manifold? :ANAL:
Author:  1slowcsm [ Tue Aug 05, 2008 12:37 am ]
Post subject: 
well it acually came with the racegate so i got a very expensive manny and wastegate for cheap i think wastegate goes around 400 itself. you wouoldnt believe some of the deals i got building this thing :D :o
Author:  TrevTec [ Tue Aug 05, 2008 10:10 am ]
Post subject: 
You do relize an original HKS cast manifold will sell for over $1000 right? The knock offs which is probably what that is are like $800.
Author:  1slowcsm [ Tue Aug 05, 2008 11:34 am ]
Post subject: 
yeah i never inspected it to see if it was authentic...got it ...bolted it...just went by the ebay add :p ....either way it seems like a hell of a manifold..and i still got it less then half price then
Author:  junk yard 86 colt [ Tue Aug 05, 2008 6:59 pm ]
Post subject: 
where are you at in md?
Author:  1slowcsm [ Wed Aug 06, 2008 12:39 am ]
Post subject: 
OC....i heard of gaithersburg, not sure where it is on a map though...where is that in ralation to bel air ?
Author:  junk yard 86 colt [ Wed Aug 06, 2008 8:57 pm ]
Post subject: 
its west of belair im near the beltway ish
Author:  1slowcsm [ Thu Aug 07, 2008 12:32 am ]
Post subject: 
ohhhh gotcha, any good junkyards your way where i might be able to find a hood ?
Author:  1slowcsm [ Wed Feb 04, 2009 2:18 pm ]
Post subject:  Re: 1slowcsm
update...


I decided to go awd. decided i don't want all that wheel spin...
Author:  biggspeed [ Wed Feb 04, 2009 3:10 pm ]
Post subject:  Re: 1slowcsm
Quote:
update...


I decided to go awd. decided i don't want all that wheel spin...

Well have you made any progress or is this post telling us of your decision to go AWD only? :lol:
Author:  1slowcsm [ Thu Feb 05, 2009 11:53 am ]
Post subject:  Re: 1slowcsm
well as far as progress i have 90% of the parts together. and there is a big hole where my trunk used to be :-) so i will post pics when it gets warmer and we get further along
Page 1 of 2 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/