4g61t.org http://www.4g61t.org/forum/ |
|
new member from mpf http://www.4g61t.org/forum/viewtopic.php?f=9&t=23341 |
Page 1 of 1 |
Author: | 3barmirage [ Sat Dec 01, 2007 9:42 pm ] |
Post subject: | new member from mpf |
hello, my name is Andie. i've been a member on mpf for almost 7 years and have always lurked around on here so i figured i should introduce myself. my 5g is almost finished, and i'm looking for either a 3g hatch or a 4g mirage sedan for my next project car/4g63t swap. my current car: 2000 mirage ls coupe with a built sohc 1.8l turbo. its made well over 400whp on the dyno, but hasn't yet been back in its current state of tune with the new turbo. i'm figuring it'll be somewhere around 450-475whp@30psi. has been 12.1@119mph with 22psi in the 1/4. should go 11s in the spring, axels allowing, since it is now tuned for 30psi. ![]() mods list: microtech ltx8s ecu 4 x external msd blaster coils .020 over ross pistons with oversize chrome moly 21mm wrist pins pauter rods clevite 77 race bearings micro polished crank port&polished head with 3 angle valve job rpw stage 2 turbo cam rpw valve springs 97 adj. lifters stock headgasket arp headstuds port matched 4g92 mivec intake manifold 60mm mivec t/b aerospeed adj. cam gear precision turbo 780cc injectors s/s log style manifold garrett t3/60-1 turbo precision turbo 31.50"x8"x3.50" fmic 2.5" and 2.75" aluminum i/c piping 50mm tial bov 38mm tial wastegate 3" s/s down pipe 3" exaust with black apexi n1 act extreme pressure plate act 4 puck race disk fidanza aluminum flywheel genuine mitsu mivec helical lsd walbro 255lph in tank fuel pump bosch inline fuel pump greddy profec b spec 2 boost control greddy peak and hold egt apexi turbo timer zeitronix wideband afr with lcd display autometer boost and oil pressure gages autometer pro shift lite corbeau forza seats moroso sealed and vented battery box moroso battery master cut-off switch spal 10" fan flex-a-lite 12" fan allstar performance oil catch can jazz radiator overflow kyb gr2 struts ground control coilovers whiteline 3 way adjustable rear sway bar tein front pillow ball mounts 15"x6.5" rota slipstreams lenso vpd drag wheels 13"x7.5" with m/t 24.5"x8" et drag slicks custom front and rear upper stb's custom rear lower tie bar vis evo c/f hood sparco hood pins evo 5 tails evo side markers civic front lip ls side skirts oem rear pods pics: ![]() ![]() ![]() ![]() ![]() ![]() ![]() it has been breaking drivers side axels at the track launching with the 2step, so it will be getting some driveshaftshop axels and an evo5 koyo aluminum radiator over its winter hibernation. now i just need to find a 3g hatch or a 4g mirage sedan for a daily driver. i have been using my ae86 but thats getting a new gze turbo motor over the winter so it needs to come off the road soon. ![]() i look forward to contributing to the 4g61t.org community ![]() |
Author: | mitsuman [ Sat Dec 01, 2007 9:56 pm ] |
Post subject: | |
Hey welcome man! This is Chris Mitsuman from MPF! I think you'll really like it here! |
Author: | 3barmirage [ Sat Dec 01, 2007 9:58 pm ] |
Post subject: | |
hey chris, thanks. |
Author: | 89Mirageman [ Sat Dec 01, 2007 10:22 pm ] |
Post subject: | |
Very nice ride man, your attention to detail is second to none. |
Author: | CaptainTonus [ Sun Dec 02, 2007 1:03 am ] |
Post subject: | |
Clean car(s). That's very impressive power for a SOHC 4G93. Please put a location in your profile. ![]() |
Author: | Aaron_37 [ Sun Dec 02, 2007 1:11 am ] |
Post subject: | |
Hey Boss ![]() |
Author: | Flying Eagle [ Sun Dec 02, 2007 7:10 pm ] |
Post subject: | |
I'm still trying to really dig the newer coupe styling but that aside, this picture says it all: Attention to detail as 89Mirageman stated, almost doesn't cover it! ![]() |
Author: | colt200 [ Sun Dec 02, 2007 7:18 pm ] |
Post subject: | |
Very very nice man. |
Author: | 3barmirage [ Sun Dec 02, 2007 7:34 pm ] |
Post subject: | |
thanks alot guys! |
Author: | 89coltgt [ Sun Dec 02, 2007 8:19 pm ] |
Post subject: | |
Great job with the sohc 1.8. The car looks great! |
Author: | MR HYDE [ Sun Dec 02, 2007 9:48 pm ] |
Post subject: | |
Quote: Great job with the sohc 1.8. The car looks great!
+1 ![]() |
Author: | ColtMax [ Mon Dec 03, 2007 8:04 am ] |
Post subject: | |
Excellent work! As the others stated, God is in details! |
Author: | turbotom20g [ Tue Dec 18, 2007 10:05 pm ] |
Post subject: | |
That's insane how you got the a built 4g93 to your favor and the engine bay looks great. Also the exterior looks outstanding, simple and clean. Great work man. |
Page 1 of 1 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |