4g61t.org

ive been searching everywhere the past 3 hours for FRONT hubs with no luck.. when I went to take my pass frt tire off yesterday 2 studs broke and 1 spun so I had to cut it off.. since I just got the van I was gonna rebuild the whole suspension but i cant seem to find any hubs for it... everythihng is either for fwd or in 90% of the cases there listed for the rears.

anyone have a P/N for the fronts for a 92 awd colt vista? or a link to a website with these parts.. need asap. thanks much.



Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.

Hubs should be the same as the Galant front hubs. Someone on the GalantVR4.org has a brand new one for sale.

http://www.galantvr4.org/ubbthreads/sho ... =0&fpart=1

_________________
Thom
1991 GVR4 1025/2000 (PTE 1200's, 16g, DSMLink v3, gm-maf, eagle/ross, .020 over, 272's, EVO VIII Wheels)
1992 GVR4 866/1000 (getting everything from above)

thanks man.. need 2 but at least it had the p/n so hopefully i can find some now..


Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.

I have a lot [lot is an understatement ] of 4 lug front hubs for the 92-95 expo/summit wagon/vista they are cleaned and powder coated too.

also as far as I know fwd and awd expo/summit wagon /vista spindles are the same part, so it's likely that the hub should be the same on fwd models.

if you need hubs pm me.

_________________
Abe

Yeah I think fwd add would be the same. Sorry I'm confused i thought your wagon was fwd ? You asked for add hubs above. But yeah the same anyhiw

_________________
Black 1989 Colt GT with 4g61t. 200k miles and climbing. Rebuilt 2.0 in the works.....
14b, 450cc's, 3" exhaust, small fmic, all running on megasquirt version: DIYPNP
White 1992 colt-vista wagon 2.4, awd, auto (daily)
Keane

Only difference would be abs or non abs.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual

I happen to have a few abs equipped ones and non abs ones... I'll see if there is any difference I'd imagine that you could still bolt the abs cover on the non abs hubs but I'll check anyway.

_________________
Abe

mine are abs.. do these have new bearings or do they still need some?.. shoot me a price for a set of abs ones to az plz. 85712.. thanks


Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.

I have the means to fully rebuild your old Vista knuckles, but you'd have to ship them to me with new bearings or I could source new quality bearings and charge you for them on top the cost of tear down and rebuild.

If you just want the hubs, they have no bearings, but they will have lug studs, and are powder coated, I can let them go for $60 shipped powder coated and you can have a shop press them in with new bearings and seals.

image upload no compressioncertificity.com
the black hub [both pictured above]on the left is an abs one, the Grey hub on the right is non abs I think the 2 extra holes for the abs ring is the only difference... everything else appears to be the same.

_________________
Abe

are they new studs in these? I have a friend who works at a shop here who will press out my old ones and press these in with new bearings. pm me your paypal if you have one.. if not shoot me a address and ill send out a money order or check.

Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.

They have the stock wheel lug studs, but I inspected them closely, and they are in good shape, [all came off of California cars: so little to no rust.] I'll pm you my paypal once the other one comes out of the oven I think I can have it ready by Monday.

_________________
Abe

Get new lug nuts and don't over torque them. Use a torque wrench and your brake rotors will thank you in the long run too. Great deal on hubs from mitsubishikid, can't duplicate for that cost!

thanks for the input Tim.. was gonna replace all 16 but needed to know if he did it first before I bought them lol.. and ill be waiting for the pm and ready to pay.. abe,, ordered all new front end parts except the subframe mounting bushings.. (still need to get in there and look at them first). so all is coming together next week.



Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.

upload gifcertificity.com
image hostingcertificity.com

okay I just got the other one finished, and now both are ready for packaging and shipment,

_________________
Abe

sweet thanks man.



Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.