4g61t.org

The good news is that I have acquired the famous "M.O.E."
The bad news is at least one control arm is rusted through
The good news is that it's going to donate its 2.4L, ECM, etc to get my AWD running to proof out the chassis before I put a ton of power to it.

The best news - pretty much everything else is up for grabs at low cost so long as you pay shipping or can meet me in the Baltimore-Lancaster areas.

Drivetrain: Everything except the front axles, driveshaft, and motor. Transmission, transfer case, differential, its all gotta go.
Interior: Dash is good, rear seats are good, door panels, plastics so long as I can remove them without destroying them. Nice bluish-grey color.
Body: Anything not welded to the shell is up for grabs. And even then I have a grinder.

Basically, if there is any little part you need, let me know. I'm going to pull its heart out in 3-4 weeks, and after that she goes on the trailer and away.

UPDATED:
Somebody make offers! Adding to the pot - AWD crossmember. Bolts to the front motor mount and a rear mount of the transmission (which 95% chance will hit the Colt steering rack). Make me an offer, I know somebody wants it.

Look like two of the posts got deleted. I am assuming SunChaser and Acrazyjonny?

I can't part with the intake\maf\throttle body just yet as I need to swap the motor running and driving into my shell to proof out the chassis while I build up the "real" motor. Not sure how long thats gonna take.

We got hacked bud yes.

Read the global announcement.

_________________
4g61t.org
4g61t.com

Was definitely aware we were down. Sunchaser had messaged me and was asking after the MAF, I just hadn't gotten a chance to get back to him before the site went down. Just wanted to make sure I hadn't missed other requests for parts since the shell is off to the scrapper shortly.

Crossmember still available?

Yep, still sitting in my breezeway. Came out of a Colt Vista AWD. I can grab the mounts off the automatic (rear mount) and maybe the mount on the front of the block, if you want those too.

before u get rid of the cross member can u post a pic of it so I can compare it to my fwd one.. thanks much




Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.

Pmed you

I pmd you how much was shipping still waiting for the response.before we go hacked

Can you re-send? What part were you looking for? I am swapping the running motor\computer into my Colt, but outside that, most stuff is up for grabs.