4g61t.org

I can do anything with any colors. I may even be able to use the scans provided for the 89-92 gauge faces.

Keep in mind these could cost upwards of $60-$80 for a set

I have a 9k and 145 mph ones. I can send let me know how much one set would be

I have the following:

240 KMH Black - Yazaki 750695-091 (with inset yellow 145MPH) CDN market turbo gauge face
9000 RPM TACH Black - Yazaki 750-697-340



It appears the little black tabs that hold the indicator arms, must be removed to get a face down scan. Hopefully they can be reset with little fuss.

Unfortunately those are "melted" on the back side to secure them. The gauge faces would come without them.

Those little stoppers keep things at the correct starting point so they don't "fall" away at power down.

I think they can be "finagled" off, and glued back in place in the rear retainer ring happens to crack and lose its retenstion capabilities.

I just pulled one off the back of the face, they have a push lock kind feature, whereby they just squeeze over a little hump in the post and voila, locked in.

Will you do this in KPH?

Right now I get the feeling that the KMH is second on the list, because there are literally 5-10 (maybe 20 worldwide) members with KMH gauges/markets that use them.
The rest of our members are in USDM cars with MPH gauges.

I will make an update when I have working pics of the white face 9k replicas drafted.

Hi,

I can send you a the right panel in KPH if you want a "physical" example.

If you can do KPH panel, I will buy a KPH panel and RPM panel and you can send me my "physical example."

Let me know.

_________________
Dodge Colt 1992 4G63T -= Racing Car =-
Toyota Corolla S 2015 -= Daily Car =-
Mitsubishi Outlander V6 2009 -= Family Car =-

I might be able to send you the USDM 145mph/9k RPM faces. My GT cluster is kind of broken at the point anyway. Would I be able to get the faces back when you are done?