4g61t.org

Specializing in the 3g CSM
It is currently Thu Apr 25, 2024 10:59 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 38 posts ]  Go to page 1 2 3 Next
Author Message
PostPosted: Mon Feb 01, 2016 1:30 pm 
Offline
Newbie
User avatar

Joined: Wed Jan 27, 2016 12:03 am
Posts: 24
Location: Central Florida
Estimated Prices based on LKQ junkyard
Since many have pm'd me asking for prices and i cannot give a detailed price for each individual part, i decided to head to LKQ's price page. The prices there may be higher or lower than the junkyard where the hatch and dsm are but it is a rough estimate of what the prices will be.
Some of their prices are absurd though.
Price List


Hey guys, at my local junkyard there is a summit hatch and a 1g dsm.
Chris suggested i post them here so you guys can take advantage of these parts just sitting there.
The hatch is a 91 4g15 automatic. It is mostly complete other than window/ door trims and some plugs i already pulled.
The dsm is mostly complete other than trans, wheels and fwd axles.
Also missing the exhaust manifold. Turbo is still there and has some shaft play, although not much, just a bit more than my 16g. The junkyard wants $100 for it so someone jump on it

There's also a few 2g dsm's, mostly 420a's but can also get pics of them for you.

Contact info: Jolneth Colon, Lojinoloc@yahoo.com and my number is (863)888-0328.
Located in Eagle Lake, Florida

If needed, i can get the vin numbers for these two.

I can pull anything you may need, shoot me a pm, text me or email me and i'll give you their price plus my $5-$10 fee for pulling parts.
I cannot post here an exact price for everything as it is too much to list.
In general, engines are $250, trans are $120, turbo's are $100, fenders are $25, doors $40
Power window motor/regulator $10($20 if cable driven)
For my safety as a seller and yours as a buyer, i only work with paypal and ship with fedex, ups or usps
Image

Image

Image

Image
Image

Image
Video walk around here https://youtu.be/L529RkS8_vQ

_________________
Founder of TechNation Aug. 2014- Present


Last edited by BenderThe5G on Fri Feb 05, 2016 5:13 pm, edited 4 times in total.

Top
   
PostPosted: Mon Feb 01, 2016 4:54 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
Somebody snatch that blank rear filler panel up. I'd be all over it but don't own a 3g anymore. It's also good there's somebody else out there willing to do this besides me because parts cars are getting so scarce.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
PostPosted: Mon Feb 01, 2016 5:45 pm 
Offline
Newbie
User avatar

Joined: Wed Jan 27, 2016 12:03 am
Posts: 24
Location: Central Florida
Chris you could have a spare in case you ever get another 3g :)

And i'm just trying to give back to the community since the community helped me a lot when i was learning about cars.

I'll probably be on here asking for info once i own an expo

_________________
Founder of TechNation Aug. 2014- Present


Top
   
PostPosted: Mon Feb 01, 2016 5:49 pm 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2143
Location: Tucson Az
Quote:
Chris you could have a spare in case you ever get another 3g :)

as he most certainly will lol

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Top
   
PostPosted: Mon Feb 01, 2016 6:01 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
You guys know me too well :lol: . Saw one on CL for $400 a week or so ago but just too far away. We actually sold the raider a few days ago. Down to the 98 mirage sedan as a dd and my 94 coupe looking all sad torn down in the back yard. Been searching CL several times a day.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
PostPosted: Mon Feb 01, 2016 6:09 pm 
Offline
Newbie
User avatar

Joined: Wed Jan 27, 2016 12:03 am
Posts: 24
Location: Central Florida
There's actually a 2 for 1 deal here if you're interested.
Both are manual too although knowing you make the adapter harnesses it would most likely be swapped to a 4g63 in less than a week

Actually one is auto and one manual :(
https://lakecity.craigslist.org/cto/5422253795.html

_________________
Founder of TechNation Aug. 2014- Present


Top
   
PostPosted: Mon Feb 01, 2016 11:31 pm 
Offline
Member

Joined: Fri Jun 12, 2015 9:25 am
Posts: 90
Location: new jersey
Hey can you get me the hatch and fuel door release cables and rear trunk latch if it has them.


Top
   
PostPosted: Tue Feb 02, 2016 12:00 am 
Offline
Newbie
User avatar

Joined: Wed Jan 27, 2016 12:03 am
Posts: 24
Location: Central Florida
Quote:
Hey can you get me the hatch and fuel door release cables and rear trunk latch if it has them.

I'll check it out if it has them. You mean the release or cables? Or both?
The latch should be there as i popped it open when i was looking around it

_________________
Founder of TechNation Aug. 2014- Present


Top
   
PostPosted: Tue Feb 02, 2016 1:31 am 
Offline
Member

Joined: Fri Jun 12, 2015 9:25 am
Posts: 90
Location: new jersey
The cables for gas door and latch. And the trunk striker (where the release cable goes to)
Thanks in advance I appreciate it


Top
   
PostPosted: Tue Feb 02, 2016 8:43 am 
Offline
Member

Joined: Fri Jun 12, 2015 9:25 am
Posts: 90
Location: new jersey
Also might want to grab the seat belt ecu in the center console there are a few people on here that are needing them


Top
   
PostPosted: Tue Feb 02, 2016 11:45 am 
Offline
Newbie
User avatar

Joined: Wed Jan 27, 2016 12:03 am
Posts: 24
Location: Central Florida
Quote:
Also might want to grab the seat belt ecu in the center console there are a few people on here that are needing them
I'd pull it but i don't know what would seel or stay in my shelf for a month.
That's why i dont typically keep an inventory anymore

_________________
Founder of TechNation Aug. 2014- Present


Top
   
PostPosted: Tue Feb 02, 2016 1:54 pm 
Offline
Some call me a god
User avatar

Joined: Mon May 18, 2009 8:53 pm
Posts: 1494
Location: Seattle, WA
I may need that seat belt control unit if this other guy doesn't get back to me.

_________________
89 Mirage Billet 20g 63t 12.4@120 417whp 400wtq @ English Racing.
89 Colt GT E316g
06 Silverado SS
07 ZX6R


Top
   
PostPosted: Tue Feb 02, 2016 2:18 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
Quote:
[I'd pull it but i don't know what would seel or stay in my shelf for a month.
That's why I either pull stuff that I know I can use or have no doubt that will sell or get payment/deposit up front. Can't go wrong that way. Most people here are long time members now that I have dealt with a lot. But back in the day I got the ol' screwgy from members that just had to have something and promised they'd buy only to tell me they didn't need it anymore once I had it here.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
PostPosted: Tue Feb 02, 2016 2:36 pm 
Offline
Newbie
User avatar

Joined: Wed Jan 27, 2016 12:03 am
Posts: 24
Location: Central Florida
Quote:
I may need that seat belt control unit if this other guy doesn't get back to me.
Let me know. It's there.

Chris, that's what happened with me. I have 6 ecu's, taillights, throttlebodies and a bunch of other stuff that never sold.
Much easier to take pics and get members to ask for parta instead of me buying random stuff
I'd do payments first but what kills me is shipping as i dont have a scale to get a quote

_________________
Founder of TechNation Aug. 2014- Present


Top
   
PostPosted: Tue Feb 02, 2016 4:09 pm 
Offline
Newbie
User avatar

Joined: Wed Jan 27, 2016 12:03 am
Posts: 24
Location: Central Florida
Blank filler panel pending sale
Image

Image

Image

Image

_________________
Founder of TechNation Aug. 2014- Present


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 38 posts ]  Go to page 1 2 3 Next

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited