4g61t.org

Specializing in the 3g CSM
It is currently Sat Apr 27, 2024 6:26 pm

All times are UTC-05:00




Post new topic  Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Thu Jun 18, 2015 9:55 am 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
I stumbled across a colt that had just came in yesterday at the yard and grabbed a few parts.

grey dash pad: One tiny crack maybe 1/4" long by the defrost vent that face the windshield. I doubt you'd ever see this once the dash is in. There is also another tiny crack just above the D/S AC vent beside the cluster. Again, its really faint and took me a while to find it. I doubt you'd ever notice it once installed. I'd give it a 9 out of 10. It's better than any csm dash I've seen. SOLD

Image

Image

Image

Image


Here is the crack by the ac vent, not even sure if you can see it.

Image

The one by the defrost vent

Image


Hydro clutch pedal assembly sold

Image


2g quick release injector clips $10 shipped

Image


Paypal is 89mirageman@live.com

Please pm me with your zip for a shipping quote on the dash pad or pedal.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
PostPosted: Thu Jun 18, 2015 12:59 pm 
Offline
CSM Junkie
User avatar

Joined: Fri Jul 14, 2006 8:51 pm
Posts: 899
Location: Grand Rapids, MI
What color is the car?

_________________
'89 Colt GT - All the rare goodies
'98 TSi AWD - Clean street car


Top
   
PostPosted: Thu Jun 18, 2015 1:19 pm 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2142
Location: Tucson Az
are the pads easy to swap out? my whole dash is out while im building the car... but my red dash is cracked badly..was gonna just have a upholstery shop redo it b ut that would cost more than this thing... are they bolted to the main dash frame or glued?.. and shipping to 85712 az..

if its a pretty easy swap then ill take it for sure

thanks

Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Top
   
PostPosted: Thu Jun 18, 2015 4:13 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
The car was silver but somebody painted the bottom black lol. From what I remember the body was pretty trashed though.

Steve, if your dash is already out you can swap the pad in less than 30 minutes. It's a few phillips screws and a bunch of little metal tabs that go through the hard plastic dash and you bend them over to hold the pad on. Just think about the old school yellow envelopes that our report cards came in with the little metal tab at the top :lol: .

I will get a quote for you and pm you in a few.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
PostPosted: Fri Jun 19, 2015 2:33 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
Dash pad sold to Steve

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
PostPosted: Sat Aug 15, 2015 9:06 pm 
Offline
Some call me a god

Joined: Tue Nov 06, 2007 7:29 pm
Posts: 1650
Location: North Idaho, USA
Chris....I have no experience with 2g parts and could use some help here. Could those quick release injector clips be used on my Colt?

_________________
Good stuff - trucks bring it!


Top
   
PostPosted: Sat Aug 15, 2015 11:27 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
Yes sir, I installed them on my colt's harness when I went through it last winter. Not that I swap injectors a lot or anything but it's nice not to have to bother with brittle plastic or those little metal clips. You simply squeeze the sides of these and pull and it slips right off. You can either cut/solder these on or de-pin the original plugs and install these. I chose the cut and solder method on mine.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
PostPosted: Mon Aug 17, 2015 11:49 pm 
Offline
Some call me a god

Joined: Tue Nov 06, 2007 7:29 pm
Posts: 1650
Location: North Idaho, USA
Quote:
Yes sir, I installed them on my colt's harness when I went through it last winter. Not that I swap injectors a lot or anything but it's nice not to have to bother with brittle plastic or those little metal clips. You simply squeeze the sides of these and pull and it slips right off. You can either cut/solder these on or de-pin the original plugs and install these. I chose the cut and solder method on mine.

Outstanding! I will take them from you, please.

_________________
Good stuff - trucks bring it!


Top
   
PostPosted: Sun Nov 08, 2015 10:13 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
Pedal assembly sold

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited