I've sold the GVR4 and Colt GT and now I have no use for this. The harness was built by myself and the ecu was flashed by Mitch McKee who was at AMS at the time. He disabled the immobilizer and set up a base map for Evo 560s and maf if I remember correctly. You would obviously custom flash it with one of the popular Evo mapping softwares for your particular application, but it will plug in and start up on any DSM with a similar setup. I left the two diagnostic link wires free so that you could wire them directly to an OBDII connector or wire them into the 1g wiring and build your own ALDL to OBDII jumper, which ever way you want to accomplish this. I don't really know what this setup goes for, but I'll ask $300 shipped and you guys can make me an offer.
Best regards,
Eric
Register
Login
Forum
Gallery
FAQ