|
stuff
Sorry for the thread being everywhere essentially I have anything you need. I am also tempted to sale my colt shell. Possibly a roller minus the trans. As its sold , Just selling a few things I have no need for. I owe a guy some money so I am making it right. Everything is located in Georgia. Send me your # in a PM for pics. I have ZERO time for low ballers or dreamers, I understand times are hard & will work with you to reach a price but things won't be free.
If the shell sales then it will turn into a full part out. It's a black 89 dodge colt with a awd swap. It's black, it's ugly, & needs body work but it was built that way. Perfect sleeper can include a long block if needed.
ECM link v3 with everything you need to run SD 1g ECU: $500
Glow shift boost, water temp, & oil pressure gauges.:$100
Blue venom 1g intake with stock TB:$300
Forrester 1g intake never ran mustang flange/ $450
Unknow mustang throttle body 75mm, comes with adapter from Magnus to run in our cars:$150
A black shaved & powder coated VC with -3 -10an fittings welded on. offer
A temptest baffled catch can, your battery would need to be relocated or you would need to get creative on mounting its rather large.: $120
A MSD dis 2 ignition with tac adapter for 1g: $-120
I have 3 Valve covers that need new gaskets but other than that are good to go: $50 each
A 90 ofh that looks to be brand new mitsu comes with 2 -10 fittings: $50
ID 2200's never ran..: $650
Bosch 1600 injectors. These sat in my car for 9 months of deployment so I need to have them cleaned: $150
A Weldon 2035a huge fuel pump: $450
Bosch 044 -10 inline pump: $125
Stock rx7 fd wheels: offer
Also have a full 2g talon. The drive train is spoken for but the interior is up for grabs.
First is my turbo setup.
a shearer top mount divided t-4 manifold. Bolted up to 2 silver tial 44's, dump tubes included. The turbo is a Borg Warner 9180 " big s366 " t-4 divided, .91 a/r. Turbo has a 90 degree compressor welded on. Turbo has never seem a dro of oil. Make an offer its a complete bolt on setup will include lines & fittings too
Also have a complete water to air intercooler setup. No heat exchanger just run ice in the fuel cell & temps stayed cool. Perfect for sleeper setups includes fuel cell, -20 ss line & fittings, water pump
Have a built 2.4 4g64 unknown condition lost all oil pressure but who knows. Good for a 2.4 build as crank & block are still good
Have a fully built 2.0 h beam setup. 9.0-1 fully built no problems. Around 1,400 miles
Have two built heads.. One is a sbr 6 bolt has no recept but you can see their stamp been ported needs new valve train. Will include bc 280's that need a polish
Have another 6 bolt ported head, SS valve train, 3G lifters, etc will include reground 280 cams & fidanza gears. Good to go, set timing & roll out
Sorry for the thread being everywhere essentially I have anything you need. I am also tempted to sale my colt shell.
|
Register
Login
Forum
Gallery
FAQ
