4g61t.org
http://www.4g61t.org/forum/

1992 Dodge Colt 4g63t * PART OUT* :(
http://www.4g61t.org/forum/viewtopic.php?f=66&t=36435		 Page 1 of 1
Author:  KOTScolt [ Sat May 19, 2012 9:08 am ]
Post subject:  1992 Dodge Colt 4g63t * PART OUT* :(
1992 dodge shell

Whats included

EVERYTHING EVERYTHING beside a 4g63t and ecu

you will get:

transmission 1g fwd, no grinds
flywheel clutch, act 2100 w/ clutchnet 4puck
complete 4g63t wiring harness
all suspension components, brand new ball joint,tie rods,1g dsm awd kyb gr2,
megan racing 2.5dp
complete 4g63t engine mount to swap into colt chassis

basically you will get everything beside a 4g63t and ecu,
get a 4g63t and ecu and you have a 4g63t swapped colt

Price is firm 1000$ text 256-794-5531 or pm located in harvard il
clean title in hand

pics at http://s1191.photobucket.com/albums/z480/awdeagle/11/
Author:  KOTScolt [ Wed May 23, 2012 12:55 pm ]
Post subject:  Re: 1992 Dodge Colt 4g63t/5speed *no motor* *no ecu*
I looked at the t-belt side of the motor today and there are issues i dont feel like messing around with so 1,000$ with motor included. The car is exactly like in the pictures, motor is still in the car. Im holding onto ecu since its dsmlink chipped.

1000$ come and get it.
Author:  KOTScolt [ Wed May 23, 2012 4:17 pm ]
Post subject:  Re: 1992 Dodge Colt 4g63t/5speed *no motor* *no ecu*
added some pics to the original photobucket link of what happened to the motor.......i was gonna try to put it back together today but when i removed everything i noticed half of the crank key is sheared clean off with the crank.

Basically the crank damper seperated luckily i was only a minute from home, got home i hear a 'metal clacking sound so i shut of the motor.....only to find out the metal clacking was the crank sprocket cracking in half.

Original build thread here.

viewtopic.php?f=64&t=35306
Author:  KOTScolt [ Tue Jun 05, 2012 10:35 am ]
Post subject:  Re: 1992 Dodge Colt 4g63t/5speed *no motor* *no ecu*
I'm parting this car out..........body panels are in good condition. I've got this posted in a few local forums also, so those guys get first bids.

http://s1191.photobucket.com/albums/z480/awdeagle/11/


text 224-828-8425
Author:  Gizmo [ Wed Jun 06, 2012 3:04 am ]
Post subject:  Re: 1992 Dodge Colt 4g63t * PART OUT* :(
Is that Magnus intake for sale?
Author:  KOTScolt [ Wed Jun 06, 2012 8:52 am ]
Post subject:  Re: 1992 Dodge Colt 4g63t * PART OUT* :(
i just posted all that stuff on a local forum yesterday, but since you got that eagle eye i'll post it here too.

These are without shipping and paypal fees


Wiseco hd 4g63 pistons 040 over bnib 500$

Magnus 1g manifold revised version 350$

Kyb gr2 front struts 1g x2 i have two sets bnib 100$ per set

Megan racing 3" downpipe for 2g gst 100$

Greddy profec b *i dont know if this works for 100%, the brain box turns on, but ive never used it myself* 100$

Pte 1600cc 300$

Pte 880cc 200$

Maf translator 3" 100$

Ebay intercooler for running short route 1g. Core 20"x8"x4", endtank to endtank 28" 80$
Author:  king_of_the_street [ Wed Jun 06, 2012 2:02 pm ]
Post subject:  Re: 1992 Dodge Colt 4g63t * PART OUT* :(
Someone help this guy fund his 240 project. :weedman:
Author:  i8acobra [ Thu Jun 07, 2012 12:53 am ]
Post subject:  Re: 1992 Dodge Colt 4g63t * PART OUT* :(
If you're parting it, can I get this windshield trim piece (circled in red)? How much for it, shipped to 89074?

Image
Author:  KOTScolt [ Thu Jun 07, 2012 1:27 pm ]
Post subject:  Re: 1992 Dodge Colt 4g63t * PART OUT* :(
i gotta figure out how to take it out first :D
Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/