4g61t.org

Specializing in the 3g CSM
It is currently Fri Oct 24, 2025 9:12 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 13 posts ] 
Author Message
PostPosted: Wed Feb 22, 2012 9:22 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Aug 19, 2002 1:02 am
Posts: 237
Location: georgia
I am selling my 89 colt gt. It will be a sad day when I sell it but I already have a race csm and 3 other cars. Hope it will go to a person who will appreciate it.

Mods:
-4g63t swap
-whole engine is rebuild by me with a lot of attention to details.
-deck block, bore .020" over, honed
-6 bolts block
-new oem .020" piston
-new oem oil pump with bs elimination using oem straight cut gears (super important to prevent oil pump failure when doing bs elimination and stub shaft
-king race main and rod bearings
-stock big rods with arp bolts and big end correctly resized
-new arp main studs
-new cometic head gasket
-new oem timing belt, tensioner, tensioner pulley, idler pulley
-ported head, gasket matched and combustion chamber work
-arp head studs
-deck head
-new valve guides and valve stem seals
-new oem valves
-stock cams, springs, and retainers


-new mhi big 16g with ported turbine housing
-new oem style gt turbo manifold (bigger runners and beefier than evo3 and 2g manifold). ported and gasket match.
-ported 2g o2 housing
-2.5" custom down pipe with manual cutout mated to factory exhaust (ultra quiet when cutout is block but will make 266hp)
-safc
-new pte 680 injectors
-new walbro 255 high pressure fuel pump
-new ets tube and fin short route street intercooler
-new custom aluminum intercooler pipes
-2g mas
-ported and polish cyclone intake manifold
-new k&n air filter with dejon intake pipe
-zex wet nitrous kit
-dyno tuned and made 302hp and 311tq at 18psi. made 352hp and 364tq with 18psi and 55 shots (nitrous switch release early or it will make few more)

-new clutch slave and master cylinders
-new brake pads
-new oem pressure plate with exedy 4 pucks clutch disc
-factory km210 that shift great
-new aluminum radiator
-new battery relocation kit
-new starter

-paint is 7-8/10
-interior is 7-8/10
-body is really straight
-not rust and very few minor dings
-no cracked dash
-radio is stock
-no crack windshield
-clean title and ready to go
-about 1000 miles on engine since rebuild
-no leak or smoke
-tires has about 40 percent of life left
-setup is really clean
-car runs great

car overall is really clean. i like to get $4500 for it. i will post pics soon. pm me or text me at 6788609924 if you are interested.

_________________
615hp and 475tq at 23psi and 75shots
http://gadsm.org/showthread.php?t=37685


Top
   
PostPosted: Fri Feb 24, 2012 10:36 am 
Offline
Restricted Newbie

Joined: Sat Jul 11, 2009 7:28 pm
Posts: 18
Quote:
I am selling my 89 colt gt. It will be a sad day when I sell it but I already have a race csm and 3 other cars. Hope it will go to a person who will appreciate it.

Mods:
-4g63t swap
-whole engine is rebuild by me with a lot of attention to details.
-deck block, bore .020" over, honed
-6 bolts block
-new oem .020" piston
-new oem oil pump with bs elimination using oem straight cut gears (super important to prevent oil pump failure when doing bs elimination and stub shaft
-king race main and rod bearings
-stock big rods with arp bolts and big end correctly resized
-new arp main studs
-new cometic head gasket
-new oem timing belt, tensioner, tensioner pulley, idler pulley
-ported head, gasket matched and combustion chamber work
-arp head studs
-deck head
-new valve guides and valve stem seals
-new oem valves
-stock cams, springs, and retainers


-new mhi big 16g with ported turbine housing
-new oem style gt turbo manifold (bigger runners and beefier than evo3 and 2g manifold). ported and gasket match.
-ported 2g o2 housing
-2.5" custom down pipe with manual cutout mated to factory exhaust (ultra quiet when cutout is block but will make 266hp)
-safc
-new pte 680 injectors
-new walbro 255 high pressure fuel pump
-new ets tube and fin short route street intercooler
-new custom aluminum intercooler pipes
-2g mas
-ported and polish cyclone intake manifold
-new k&n air filter with dejon intake pipe
-zex wet nitrous kit
-dyno tuned and made 302hp and 311tq at 18psi. made 352hp and 364tq with 18psi and 55 shots (nitrous switch release early or it will make few more)

-new clutch slave and master cylinders
-new brake pads
-new oem pressure plate with exedy 4 pucks clutch disc
-factory km210 that shift great
-new aluminum radiator
-new battery relocation kit
-new starter

-paint is 7-8/10
-interior is 7-8/10
-body is really straight
-not rust and very few minor dings
-no cracked dash
-radio is stock
-no crack windshield
-clean title and ready to go
-about 1000 miles on engine since rebuild
-no leak or smoke
-tires has about 40 percent of life left
-setup is really clean
-car runs great

car overall is really clean. i like to get $4500 for it. i will post pics soon. pm me or text me at 6788609924 if you are interested.
pictures PLEASE.....


Top
   
PostPosted: Sat Feb 25, 2012 10:44 pm 
Offline
CSM Junkie

Joined: Sun Sep 23, 2007 3:30 pm
Posts: 570
Location: Charlotte,Nc
How soon do you consider soon to post pics?


Top
   
PostPosted: Sun Feb 26, 2012 4:55 am 
Offline
Some call me a god
User avatar

Joined: Fri Jan 09, 2004 4:08 am
Posts: 1263
Location: Hayward, CA
in for pics! or text it to me 510 305 nine three two eight

_________________
My feedback thread:

http://www.4g61t.org/phpBB2/viewtopic.php?t=18146


Top
   
PostPosted: Sun Feb 26, 2012 8:10 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Wed Jul 11, 2007 1:25 pm
Posts: 204
Location: Charlotte, NC
Does it have working A/C?
Please send some pics to getboosted@juno.com.

Thank you!

____________________


Top
   
PostPosted: Sun Feb 26, 2012 9:52 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Aug 19, 2002 1:02 am
Posts: 237
Location: georgia
sorry guys. it rained on the days i was free. i will try to take pics this weeks when it is more sunny out and post it.

_________________
615hp and 475tq at 23psi and 75shots
http://gadsm.org/showthread.php?t=37685


Top
   
PostPosted: Sun Feb 26, 2012 9:54 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Aug 19, 2002 1:02 am
Posts: 237
Location: georgia
ac was cold before i unhooked the line to do the swap. it will need to be vacuum and charge up.

_________________
615hp and 475tq at 23psi and 75shots
http://gadsm.org/showthread.php?t=37685


Top
   
PostPosted: Wed Feb 29, 2012 10:25 am 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Aug 19, 2002 1:02 am
Posts: 237
Location: georgia
here are some pics. sorry it been in the garage for 2 months so it is a little dusty. it definitely needs a bath and quick buff. i buffed the hood and front bumper so they are nice and shiny. the original paint is single stage so it buffed up shiny. it should be completely buffed and shine up before it goes to a new home.

Image

Image

Image

Image

Image

_________________
615hp and 475tq at 23psi and 75shots
http://gadsm.org/showthread.php?t=37685


Top
   
PostPosted: Wed Feb 29, 2012 10:27 am 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Aug 19, 2002 1:02 am
Posts: 237
Location: georgia
Image

Image

Image

Image

Image

Image

_________________
615hp and 475tq at 23psi and 75shots
http://gadsm.org/showthread.php?t=37685


Top
   
PostPosted: Wed Feb 29, 2012 10:30 am 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Aug 19, 2002 1:02 am
Posts: 237
Location: georgia
Image

Image

Image

Image

Image

Image

Image

_________________
615hp and 475tq at 23psi and 75shots
http://gadsm.org/showthread.php?t=37685


Top
   
PostPosted: Wed Feb 29, 2012 11:21 am 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Aug 19, 2002 1:02 am
Posts: 237
Location: georgia
Will try to post Dyno sheets tonight.

_________________
615hp and 475tq at 23psi and 75shots
http://gadsm.org/showthread.php?t=37685


Top
   
PostPosted: Wed Feb 29, 2012 10:09 pm 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Wed Jun 17, 2009 8:48 pm
Posts: 336
Location: San Diego, CA
Dang if I was swapping the colt soon I would definitely be picking this up. Glws!

_________________
1991 Plymouth Colt - Project
2001 Audi S4- Stage 3 Daily Driver


Top
   
PostPosted: Tue Mar 06, 2012 12:03 am 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Aug 19, 2002 1:02 am
Posts: 237
Location: georgia
car is sold to one of my friend.

_________________
615hp and 475tq at 23psi and 75shots
http://gadsm.org/showthread.php?t=37685


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 13 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Limited