4g61t.org
http://www.4g61t.org/forum/

Cleanin Out The Pile 'O Parts!
http://www.4g61t.org/forum/viewtopic.php?f=66&t=36026
Page 1 of 1

Author:  Mechacode [ Fri Feb 17, 2012 2:01 am ]
Post subject:  Cleanin Out The Pile 'O Parts!

Collected parts for a few years, ended up with some duplicates, rarities, oddities, stuff I'll never use. See it in the picture, feel free to ask about it and/or make an offer. Whatever doesn't sell will probably end up in the dumpster.

Stuff I know that's there:
Rear CSM disc brakes, rotors/calipers/mounting hardware/bracket.
Cyclone intake manifold, COMPLETE with solenoids/vacuum can.
6 2.25" red couplers, brand new in the bags
Unstained rear csm seat
CSM car bra
Rear csm taillight, right side I think, unbroken
Turbo csm wing -$50
AWD dsm flywheel 63d4d (needs resurface) -$30
CSM auto seatbelts, both sides
CSM steering column
CSM wiring harness, I believe it's a 4g15 engine harness
CSM control arms
Fart can, looks like 2.5 inlet and coffee can exit -$30
CSM master cylinder/reservoir
CSM door weatherstripping
4g15 Maf, worked great -$10
Brand new 4g15 water pump -$20
Stock CSM headlight bulbs, all 4 -$5
Downpipe, looks like 2.5" with a 1/4" flange -$20
4g63T .020 over Ross pistons on eagle rods,used but in perfect shape, low miles, old rings still on them, new rings included, can't remember who I got them off of but it was on widsm. -$500

Stock awd dsm upper strut plates. Rusty but the rubber is immaculate with no cracks. Why spend $55/piece on ebay, get these for much cheaper.
Image

Image

Image

Image

Image

Image

Image

Author:  slowdsm [ Fri Feb 17, 2012 5:14 am ]
Post subject:  Re: Cleanin Out The Pile 'O Parts!

dammit why do u have to be so far away lol... i need a ds power seatbelt unit...but there so damn awkward so would be a pain to package and ship.



Steve

Author:  DarkHorse [ Fri Feb 17, 2012 5:23 am ]
Post subject:  Re: Cleanin Out The Pile 'O Parts!

interested in the car bra. pics and shipping quote to 97321

thanks man!

Author:  kaeser1 [ Fri Feb 17, 2012 4:36 pm ]
Post subject:  Re: Cleanin Out The Pile 'O Parts!

What size engine is the Cyclone manifold for? 2.0L or 1.6L?

Thanks!

Author:  Mechacode [ Fri Feb 17, 2012 4:41 pm ]
Post subject:  Re: Cleanin Out The Pile 'O Parts!

Quote:
What size engine is the Cyclone manifold for? 2.0L or 1.6L?

Thanks!
They came on 2L.

http://www.dsmtuners.com/forums/article ... setup.html

http://www.lilevo.com/mirage/Cyclone%20 ... yclone.htm

Author:  Mechacode [ Sat Feb 18, 2012 4:47 am ]
Post subject:  Re: Cleanin Out The Pile 'O Parts!

Come on guys, I know you're all getting your tax refunds!

Quote:
interested in the car bra. pics and shipping quote to 97321

thanks man!
I'll see if I can pack it into a flat rate box.

Author:  Peppi_C50 [ Sat Feb 18, 2012 7:20 am ]
Post subject:  Re: Cleanin Out The Pile 'O Parts!

Whats the price for the cyclone?

Author:  Mechacode [ Sun Feb 19, 2012 3:46 am ]
Post subject:  Re: Cleanin Out The Pile 'O Parts!

Sorry guys, cyclone sold last night.

Author:  Mechacode [ Fri Feb 24, 2012 2:49 am ]
Post subject:  Re: Cleanin Out The Pile 'O Parts!

Quote:
interested in the car bra. pics and shipping quote to 97321

thanks man!

Haven't forgotten about ya, it doesn't fit in a flat rate box, have to find something bigger. Pm what you'd expect to pay for it and we can go from there.

Author:  Peppi_C50 [ Fri Feb 24, 2012 3:23 am ]
Post subject:  Re: Cleanin Out The Pile 'O Parts!

Can you send me a pic from the wing?
Peppi@mitsu-ig.de

Author:  Mechacode [ Thu Mar 01, 2012 4:39 am ]
Post subject:  Re: Cleanin Out The Pile 'O Parts!

Quote:
Can you send me a pic from the wing?
Peppi@mitsu-ig.de

The wing is the same wing that is on your red CSM Peppi.

Author:  Peppi_C50 [ Thu Mar 01, 2012 9:59 am ]
Post subject:  Re: Cleanin Out The Pile 'O Parts!

OK, thanks!

Author:  Mechacode [ Fri Apr 06, 2012 2:22 pm ]
Post subject:  Re: Cleanin Out The Pile 'O Parts!

Bump.

Author:  RedTsi [ Fri Apr 06, 2012 3:53 pm ]
Post subject:  Re: Cleanin Out The Pile 'O Parts!

how much for the wing shipped to Puerto Rico, 00754?

Author:  4G15COLT [ Sat Apr 14, 2012 2:39 am ]
Post subject:  Re: Cleanin Out The Pile 'O Parts!

How much can u do the rod n pistons shiped to 91342

Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/