4g61t.org

I have front knuckles from a Galant VR4.
150$ Shipped!

200$ Shipped for them with calipers.


If you need any other DSM/CSM/GVR4/ crap, let me know.



Just figured I'd throw a picture in there.

Also, Mechacode is vouching for me, Have known him for a LONG time!



Thanks!

_________________
Had a:
1991 Eagle Summit ES Hatchback - 4g15 12v 5spd
1991 Dodge Colt -4g15 12v 4spd
Have a:
1978 Oldsmobile Cutlass - 468BBO TH350
Round 3:
1990 Dodge Colt-4G63T 5spd

100$ shipped. I will take these in for scrap if nobody wants them........

ill give you more than the scrappers will

_________________
1990 Colt AWD 8.8

Every time I buy something I "NEED" for my hatch...something always comes up.

100$ seriously. Please. I need to finish my Galant. NONE of you guys can use these?

I'm assuming you want 100 for the knuckles, 150 for the entire setup?

_________________
Had a:
1991 Eagle Summit ES Hatchback - 4g15 12v 5spd
1991 Dodge Colt -4g15 12v 4spd
Have a:
1978 Oldsmobile Cutlass - 468BBO TH350
Round 3:
1990 Dodge Colt-4G63T 5spd

I'm open to offers seriously, but we'll go with that.

What's the best way to ship something like that? Seems at 50lbs or more for everything shipping could be close to $100.

_________________
'89 Colt GT w/bigger than stock turbo
'91 Talon AWD w/bigger than stock turbo
'05 Dodge diesel w/bigger than stock turbo

Pack it in the smallest box possible and take it to ups/fedex. When I had a set shipped to me, it cost a little over $60.

_________________
Had a:
1991 Eagle Summit ES Hatchback - 4g15 12v 5spd
1991 Dodge Colt -4g15 12v 4spd
Have a:
1978 Oldsmobile Cutlass - 468BBO TH350
Round 3:
1990 Dodge Colt-4G63T 5spd

The calipers will fit in a large flat rate box from USPS- $14.95. Actually the knuckles and hubs will too but you will have to press the hubs out to make it all fit. This would only work if the buyer was planning to replace the bearings anyway which is always a good idea while they're off. So going this route it would be less than $30 anywhere in the US.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual

100$ for the knuckles. Still trying to sell these.

What are you guys, sissies? If you want to make G strings wet, and panties drop, you best buy these to put on your fruit and banana classy early 90's hatch. Are you afraid of the massive poon these knuckles will give you? Trust me, there is nothing to be afraid about, as soon as you bolt these fruit and banana' knuckles up to your car you will feel like a junior executive CEO. fruit and banana yeah don't you wanna feel like that? I know I do, well I would, if I had a Colt anyways. This will make your car feel like a yeti just had 5 condoms full of coke explode in his ass in the middle of an airport, trust me, you fruit and banana want these.


100$ takes them.

I really hope this style of ad is'nt catching on? http://vancouver.en.craigslist.ca/pml/c ... 10616.html
I already have seen literally 20 different clones of this ad in the past two days. Oh well, good luck with the sale.

If you would've said thes knuckles would put a new roof on my house, I would've been all over this.

I wish I had paypal... I'd be all over them like a fat kid on a chocolate cupcake! Oh, sorry, your ad had me a feeling spontanious. Haha! But seriously thought... I do regret not being able to start up an account any time soon. I want your scrap metal (as you call it).

_________________
92 Plymouth Colt (4g63t, fwd) DD.
05 Jeep Grand Cherokee Limited
(Hemi powered grocery getter) WIFES DD.