4g61t.org

Brand new, only been out of the packaging for pictures and test fit. I paid $120 for the set, I'd like to get $90 shipped but open to offers.

I personally have these on my colt with custom brackets I made for the calipers and e-brake cables. Awesome setup. Bump for a great substitution to Colt GT hubs.

_________________
91 Talon - was 454 whp/440 ft/lbs, now DD
89 C52A - 4G63T To the crusher
91 C52A - 4G63T Up and Running (AWD swap coming!)

dammit!! I wanted these for a couple years, and finally just bought my set a couple months ago... good luck with the sale

_________________
~Jared, owner and operator of The Black Widow
10.24 @ 142.86, 1.58 60'
http://www.JayRacing.com

Are those the ones to use when doing 5 lugs conversion?

_________________
95' Talon Tsi AWD- 11.7@118
DSM vs Sti: http://youtu.be/0rBoxKxQvNQ
89' Mirage AWD swapped- 11.5@128 stock frame turbo
1989 Mirage Turbo AWD 11.5 @ 127: http://youtu.be/AhtJuKT-c5U

Yes

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual

I don't need them, but are those stock fit replacements for rear disk?

If you mean stock replacement for a turbo car, then no. These don't go in on the stub as far as the original turbo hubs (about a 1/2" difference), so you would need custom caliper brackets like Harv has done.

Thanks for the input guys.

Yeah its weird, the 92 mirage sedans don't have the 1/2" lip on the rear stub axles that the oil seal fits over. Therefore these hubs go all the way on, if you use them on a 89-91 car they will work and tighten up fine but they sit out a little. The 92 mirage uses the same caliper bracket as the 89 turbo cars do so that part is the same. However you would need to space the caliper out wiith washers or make a thick bracket like Harvey did. I have no idea why they changed the rear axle for one year but they did.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual