4g61t.org
http://www.4g61t.org/forum/

SOLD JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
http://www.4g61t.org/forum/viewtopic.php?f=66&t=30476		 Page 1 of 5
Author:  sketzshane [ Sat Aug 22, 2009 11:18 pm ]
Post subject:  SOLD JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
Well I am scrapping my road Cyborg so if anyone wants any part.... I will check and see how much shipping to the United States would be and contact by personal message or in this thread.

I have these for sale!!! I know most likely you guys would be interested in the front bumper and the lighter stuff but I am just going to post everything and see what happens.

4G63T RVR Engine stripped 7 BOLT.
Eclipse FWD Gearbox with LSD Diff with Evo 3 pressure plate, clutch and flywheel
Shifter Assembly with pedals
4G64 Header
450cc Injectors
Evo 3 ECU with complete wireloom
Walbro fuel pump
Coil packs with plug wires
Alternator
Starter
Igniter
4 Solid Engine Mounts
Front Seats
Rear Seats
Intrax Lowering springs
Slim Fans
Evo 1 Rims
Complete Rear Disc Setup
AC Compressor
etc....
Just ask for what you need!!!!!

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

That is the 4G64 Header
Image
Author:  CSM Shaun [ Sun Aug 23, 2009 12:14 am ]
Post subject:  Re: FS My JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
Why are you scrapping this car? I don't mean to jack your thread but I would hope that you could sell that thing whole to someone on that island and save that beautiful car from being turned into a cube...
Author:  Mechacode [ Sun Aug 23, 2009 11:06 am ]
Post subject:  Re: FS My JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
Ditto. That thing is near mint Shane, don't rip it to bits!

Dibs on the solid mounts if you do.
Author:  1japdsm [ Sun Aug 23, 2009 12:19 pm ]
Post subject:  Re: FS My JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
pmed
Author:  Crackerman [ Sun Aug 23, 2009 1:34 pm ]
Post subject:  Re: FS My JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
front bumper?

little door under the radio?

Floor mats?
Author:  Evotistical [ Sun Aug 23, 2009 4:04 pm ]
Post subject:  Re: FS My JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
sombody just import the whole car! :lol:
How much would it be to send to the states?
Author:  CSM Shaun [ Sun Aug 23, 2009 9:10 pm ]
Post subject:  Re: FS My JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
Is it a true Cyborg meaning it is AWD?
Author:  sketzshane [ Sun Aug 23, 2009 11:21 pm ]
Post subject:  Re: FS My JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
Quote:
Why are you scrapping this car? I don't mean to jack your thread but I would hope that you could sell that thing whole to someone on that island and save that beautiful car from being turned into a cube...
The shell is going to be a spare shell in case I mess up my Race Cyborg. If you think that is a beauty you need to see the other one when it finish.
Quote:
Is it a true Cyborg meaning it is AWD?
Is it FWD!!!! It came with a NA 4G61 (C53A Chassis etc...)

My race car is true Cyborg came with everything front bumper, side skirts, rear bumper, mid wing and top wing, 4G61T etc....
Author:  sketzshane [ Sun Aug 23, 2009 11:22 pm ]
Post subject:  Re: FS My JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
Quote:
sombody just import the whole car! :lol:
How much would it be to send to the states?
Too expensive and I keep certain parts as spares including the chassis!!!!
Author:  sketzshane [ Sun Aug 23, 2009 11:43 pm ]
Post subject:  Re: FS My JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
All prices are quoted in US Dollars
Front Bumper is $230
Rear Bumper is $170
Side Skirts are $80
Little Door is $25
Floor Mats are $30
If you want Front and Rear Bumper the cost is $360, If you Front and Rear and Side skirts the cost is $420!!!

I have not checked on the shipping for any item as yet since here in Jamaica you cannot obtain rates within the weekend... I will check within the week with DHL, FEDEX and regular Post Office and find what their rates are and time frame. I will pm the persons that are interested. Whoever I get money from first will obviously get the part. I am 100% trustworthy and everyone that wants to do business with me feel free that you will have no worries. I have sold members on the site stuff already and have 100% feedback. I am going to take closer pics so ppl can see exactly what the are paying for. My cellular number is 876-419-9665 and my email is s_hotist@hotmail.com. Thanks all for their interest :wink:
Author:  Crackerman [ Sun Aug 23, 2009 11:52 pm ]
Post subject:  Re: FS My JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
also, i am realllyy diggin those seats. could i get a cost on the whole set as well? i know its gonna be $$, but they are cooler than my disco seats. or would you be willing just to sell the skins? (with headrests) that would really save on shipping $$
Author:  sketzshane [ Mon Aug 24, 2009 12:17 am ]
Post subject:  Re: FS My JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
Quote:
also, i am realllyy diggin those seats. could i get a cost on the whole set as well? i know its gonna be $$, but they are cooler than my disco seats. or would you be willing just to sell the skins? (with headrests) that would really save on shipping $$
A friend of mine says he wants the front ones. He says he will pay by tomorrow. If he changes his mind then I will give you a quote for the skins with headrests the entire set(Honestly, though them kinda need some cleaning and some areas have a slight burn look than others). Anyways shipping a seat from Ja would be very expensive most likely that would have to be sea freight or else might as well you buy some Recaros on ebay.... because the shipping price alone may go up to those monies :o
I will take better pics when I get the chance.
Author:  phoenixcolt [ Mon Aug 24, 2009 1:18 pm ]
Post subject:  Re: FS My JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
What about the RHD setup? dash, steering colum etc.
Author:  sketzshane [ Mon Aug 24, 2009 6:59 pm ]
Post subject:  Re: FS My JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
Quote:
All prices are quoted in US Dollars
Front Bumper is $230
Rear Bumper is $170
Side Skirts are $80
Little Door is $25
Floor Mats are $30
If you want Front and Rear Bumper the cost is $360, If you Front and Rear and Side skirts the cost is $420!!!
Total cost (shipping included) will ship to any state in the US for these prices below by DHL and you will receive tracking numbers.
Front Bumper alone is $350
Rear Bumper alone is $290
If you want want both Front and Rear Bumpers the total cost is $520. If you want Front and Rear and Side skirts the total cost is $600.
Author:  Ninjaneonturtle [ Mon Aug 24, 2009 7:37 pm ]
Post subject:  Re: FS My JDM 1991 Mitsubishi Mirage with RVR Turbo 7 Bolt setup
where did you even get those floor mats? I want a set.. what brand are they?
Page 1 of 5 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/