4g61t.org http://www.4g61t.org/forum/ |
|
FS: 4G63 swap mounts, adapter harness and custom brake parts http://www.4g61t.org/forum/viewtopic.php?f=66&t=25358 |
Page 5 of 6 |
Author: | turbo=good [ Mon Oct 29, 2012 11:16 pm ] |
Post subject: | Re: FS: 4G63 swap mounts, adapter harness and custom brake p |
I only read the first few posts here, so sorry if this has been asked already. I will be doing a 4g63 dune buggy project. Do you do custom mounts to specification? Kyle Atlanta, GA 404-514-1344 |
Author: | UnderPSI [ Tue Oct 30, 2012 6:27 pm ] |
Post subject: | Re: FS: 4G63 swap mounts, adapter harness and custom brake p |
Are you still offering the 4x100 rear disk kit? |
Author: | 89Mirageman [ Wed Oct 31, 2012 8:44 am ] |
Post subject: | Re: FS: 4G63 swap mounts, adapter harness and custom brake p |
Yes I am |
Author: | cody.m [ Mon Mar 18, 2013 12:32 am ] |
Post subject: | Re: FS: 4G63 swap mounts, adapter harness and custom brake p |
Are you still making mounts and harness? |
Author: | 89Mirageman [ Tue Mar 19, 2013 9:07 am ] |
Post subject: | Re: FS: 4G63 swap mounts, adapter harness and custom brake p |
Yep |
Author: | rcrmach [ Sun Jun 16, 2013 9:21 pm ] |
Post subject: | Re: FS: 4G63 swap mounts, adapter harness and custom brake p |
PM sent |
Author: | Turbonuk [ Sat May 17, 2014 8:09 am ] |
Post subject: | Re: FS: 4G63 swap mounts, adapter harness and custom brake p |
Are you still making the 4g mirage mounts to run the 1g trans. Also will the adapter harness work on the 4g mirage? Thanks for your time. |
Author: | 89Mirageman [ Sat May 17, 2014 10:11 pm ] |
Post subject: | Re: FS: 4G63 swap mounts, adapter harness and custom brake p |
I do make an adapter harness for a 4g Mirage but I never bothered to make jigs for the engine mounts. |
Author: | 92expo4g63 [ Mon Sep 29, 2014 1:09 pm ] |
Post subject: | Re: FS: 4G63 swap mounts, adapter harness and custom brake p |
do you make the dash harness adapters for a 92 expo using a 1g harness? i have already got the 2 plugs that go to the dash of the expo, just need a jumper made , can get 1g dash side plugs also. |
Author: | drcolt2000 [ Tue Mar 01, 2016 11:29 pm ] |
Post subject: | Re: FS: 4G63 swap mounts, adapter harness and custom brake p |
I am interested in the rear brake bracket. How much to ship to Canada, postal code m9c1v3? |
Author: | 89Mirageman [ Wed Mar 02, 2016 9:29 am ] |
Post subject: | Re: FS: 4G63 swap mounts, adapter harness and custom brake p |
$25 for a small flat rate box to Canada |
Author: | drcolt2000 [ Mon Oct 24, 2016 9:21 pm ] |
Post subject: | Re: FS: 4G63 swap mounts, adapter harness and custom brake p |
I forgot about this post, I havent received the notifications. I am still looking to convert my 88 sedan colt from drums to disc. Can I get the measurements on the adapter from hole to holes? I was going to order 1995 Hyundai Elantra GLS 1.8 w/abs parts, but the bracket adapter is discontinued. If your parts measure up to my car. I will take a set of adapter brackets. |
Author: | 89Mirageman [ Tue Oct 25, 2016 3:35 pm ] |
Post subject: | Re: FS: 4G63 swap mounts, adapter harness and custom brake p |
From center to center on the two top holes it's 3-1/16" From center to center on the two side holes it's 1-3/4" From center to center diagonal it's 3-1/2" All measurements are approximate but very close. Hope this helps... |
Author: | Street Surgeon [ Tue Feb 14, 2017 8:08 am ] |
Post subject: | Re: FS: 4G63 swap mounts, adapter harness and custom brake parts |
Hi there, you don't by chance make a trans mount to swap in a 2G AWD transmission, if so I could definitely use one! |
Author: | 89Mirageman [ Thu Feb 16, 2017 7:50 am ] |
Post subject: | Re: FS: 4G63 swap mounts, adapter harness and custom brake parts |
The mounts that I modify should fit the 2g trans as well. The upper stepped part of the case is the same. |
Page 5 of 6 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |