Deatschwerks 1000 cc injectors have 30 miles roughly on them only have had pump gas ran through them. Bought through maperformance asking 250 obo plus shipping
https://www.maperformance.com/products/ ... wCEALw_wcB
Turbo is an hx35 8 blade in a bep housing spooled extremely quick turbo was brand new and only has about 10 minutes of idle time on it and roughly 2-3 miles since the rebuild. The bep housing manifold stud holes need to be helicoiled I bought the housing second hand (was supposed to be perfect condition) and it showed up with mangled bolt holes I ended up just using smaller grade 10 bolts that fit through the housing and ran it that way on my old hx35/40 setup. And for the 2-3 miles on this turbo everything else is good to go. Also this is setup for the external off the o2 housing looking for 500 obo plus shipping.
Just upgraded so out with the old in with the new feel free to text with any questions 8014149255
I dont remember how to post pictures on here because it's been so long but if you need/ want any please feel free to call or text anytime