4g61t.org

I decided to make the same tool that Jay Racing makes for setting the cam gears while doing a timing belt installation. I plan on getting it made out of 1/2" aluminum. I am still waiting for the quote on how much it is going to cost to have made. A few people are interested on the local forum but figured I would try you guys. I do not expect to make much money on these at all, I just wanted to provide a good tool to an awesome community of people. Here is a picture of what I have drawn up. I will upload a 3D picture later.



Let me know if you are interested. I am thinking the price will be around $25 plus shipping but will include a handle unlike the Jay Racing but more like the Kent Moore tool.

_________________
91 Talon - was 454 whp/440 ft/lbs, now DD
89 C52A - 4G63T To the crusher
91 C52A - 4G63T Up and Running (AWD swap coming!)

I like that but would prefer that white hard plastic stuff over any type of metal.. but keep us posted when u get a price.



Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.

Agreed, a Delrin tool will be much easier on the gears... especially for those with pretty adjustables!

_________________
Who puts an Evo VII motor in a Colt? Oh yeah...

I'd be interested as well and agree with the previous two comments on a softer, yet durable material.

Why not just buy it from Jay racing, no point trying to reinvent the wheel... They aren't that expensive to start with.

_________________
49 International KB-2
72 Dodge Colt
73 Dodge Colt (Project)
84 GMC K3500
85 Dodge D50 Diesel Swap
90 Mighty Max V6
89 Mirage Turbo
94 Mighty Max
99 Montero

I did it out of boredom. It's too cold to work on my colt so I decided to do this. I have plenty of interest in it locally so I figured I would put it on here in case anyone else wanted one. My buddy has the plastic one and he said its kind of a bitch to get it out because it has no handle. Like I said before, I am not doing this to make money so if nobody here wants one that is fine with me.

_________________
91 Talon - was 454 whp/440 ft/lbs, now DD
89 C52A - 4G63T To the crusher
91 C52A - 4G63T Up and Running (AWD swap coming!)