4g61t.org

I'm looking to finally build the motor for the summit and selling off some parts. All prices are obo and include shipping. I prefer paypal, but we can work something out if that doesn't work. My cell is 440-476-8635 if you have any questions or you can just message me here. Thanks, Chris

-Holset HX40 (8-blade) w/ BEP Bolt-on housing. The compressor housing is polished and the turbo only has 500-600 miles since a fresh rebuild as you can see by the pictures. It's never smoked and was always oiled properly with a restrictor fitting. My summit trapped 122 on this turbo without even being pushed. --- $625 shipped

-Slowboy Racing cast exhaust manifold w/ 38mm wastegate hole off the runner. Bought it new and has the same miles as the turbo (500-600). Sells for $300 new and here are the specs from Slowboy's website http://www.dsmparts.com/customer/produc ... t=0&page=1 --- $180 shipped

"The new SBR cast manifold. This manifold has the same external dimensions as the evo, but inside is where we really shine. The runners are larger, the collector is bigger, and it just flat out flows more. We cast these with a slightly thicker flange as well to space out for you guys running our turbos with the larger compressor covers.This manifold works great for anything with a mitsu flanged turbine inlet. It has a slightly thicker flange to help get large compressor covers away from the water pipe. All surfaces on the manifold that are up against a gasket are fully machined after casting to ensure flat surfaces that seal everytime!"

Manifold is SOLD

Any offers???

Turbo SOLD