4g61t.org http://www.4g61t.org/forum/ |
|
Target 1000hp Turd http://www.4g61t.org/forum/viewtopic.php?f=64&t=40003 |
Page 1 of 3 |
Author: | biglady112 [ Mon Feb 16, 2015 11:49 am ] |
Post subject: | Re: Target 1000hp Turd |
Author: | biglady112 [ Mon Feb 16, 2015 11:51 am ] |
Post subject: | Re: Target 1000hp Turd |
Author: | Flying Eagle [ Mon Feb 16, 2015 2:13 pm ] |
Post subject: | Re: Target 1000hp Turd |
Are those LSD insert plates, welded into that differential? Great way to fill space and keep things aligned. Subscribed! |
Author: | biglady112 [ Mon Feb 16, 2015 3:49 pm ] |
Post subject: | Re: Target 1000hp Turd |
It is. The transmission i got out of the junkyard was from a 94 and had the large axles. My friend gave me a differential to throw in there but, it needed to have the bearings replaced as I did not get the races for it. It did not have a cross shaft either. I tried to put the pin from the stock diff in there but, it was too large and could not fit in the jrlew diff. My friend just did an awd conversion on his turbo mirage and was throwing away his FWD DSM granny as it was hammered and in really bad shape and needed a complete rebuild. I needed a small axle diff and remember he still had it and it was already torn apart. When I went to get it I forgot it had the insert. We repaired and welded our other mirage diff last year that had an insert in it that we welded all together and it has turned out well. So I figured I would weld this one all up. I did not even take it apart as it shared the same ring gear as this transmission I just bought had. Anything to make it just a little stronger. What better way than to fill the differential with a block full of metal. |
Author: | CaptainTonus [ Mon Feb 16, 2015 11:11 pm ] |
Post subject: | Re: Target 1000hp Turd |
That's really awesome! Looks like the 4G63 is a tight squeeze in there, much like a C10 Mirage. I'm looking forward to seeing this build progress. |
Author: | DSMERwCOLT [ Thu Feb 19, 2015 1:17 pm ] |
Post subject: | Re: Target 1000hp Turd |
Not to throw in a distraction, but I always thought these cars needed to be rwd......I mean you are going through all the same steps and would have to throw in a few more. |
Author: | biglady112 [ Thu Feb 19, 2015 3:01 pm ] |
Post subject: | Re: Target 1000hp Turd |
That is what the starion is for. And I have no desire to own one of those. I like playing in FWD land. Keeps it challenging. I would build a better looking rwd car than try and mess with this thing. |
Author: | DSMERwCOLT [ Fri Feb 20, 2015 7:31 am ] |
Post subject: | Re: Target 1000hp Turd |
This car looks so much like my silver 83 honda civic build especially without the glass in (I have not had the glass in since I bought my civic)and the frame trimming for the trans. |
Author: | pimpy rider [ Mon Feb 23, 2015 9:19 pm ] |
Post subject: | Re: Target 1000hp Turd |
interested in what this thing weighs when its all done! |
Author: | biglady112 [ Mon Feb 23, 2015 9:20 pm ] |
Post subject: | Re: Target 1000hp Turd |
I hope stupid light if the internet did not lie one its stock weight. |
Page 1 of 3 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |