4g61t.org http://www.4g61t.org/forum/ |
|
4 years later http://www.4g61t.org/forum/viewtopic.php?f=64&t=38040 |
Page 3 of 7 |
Author: | Flying Eagle [ Sun Mar 02, 2014 9:41 am ] |
Post subject: | Re: 4 years later |
Like a tank. In a good way. Worried about the tires hitting, especially as the rear shunts over to one side during compression ... the issue with lowered panhard setups. Adjustable panhard rod will help for sure. Anything lower than 1.5" should be using one, as a rule of thumb here. What rim sizing offset, center bore diameter and tires sizes are you running ?? |
Author: | xxNocturnalxx [ Sun Mar 02, 2014 10:58 am ] |
Post subject: | Re: 4 years later |
Looks beefy man, are they sticking out further in the front? |
Author: | cheaptalon [ Sun Mar 02, 2014 12:15 pm ] |
Post subject: | Re: 4 years later |
I would guess 15x8 +20. Maybe a 16". Those wheels only come in a +20 offset as far as I know. The front probably sticks out a little more too. Common problem on CSMs that is usually only more noticeable with an aggressive offset wheel. |
Author: | xxNocturnalxx [ Sun Mar 02, 2014 2:06 pm ] |
Post subject: | Re: 4 years later |
They are 16x8 +20 225/45s |
Author: | debow_8787 [ Mon Mar 03, 2014 5:40 pm ] |
Post subject: | Re: 4 years later |
it dose sticks out a lil bit more in the front but i can pull the front fenders easy i think the rear is going to be a lil bit harder to pull.i would also like to get a set of coilovers or a set of stiffer struts and springs because right now the rear is super soft. the wheels are 16x8+20 with a 225 45 bridgestone G-force tires. |
Author: | debow_8787 [ Fri Mar 07, 2014 2:13 am ] |
Post subject: | Re: 4 years later |
well i did a lil work on the car today i pulled the fenders before after after that i installed the battery setup. |
Author: | debow_8787 [ Sun Mar 09, 2014 11:22 pm ] |
Post subject: | Re: 4 years later |
messed around a lil bit today in the gaurge did not do much just out the head lights back in and the front mount back on.i am also refinishing the wheels for my BMW as well. here are the wheels i am refinishing. i have 2 done now i just need to dig the other 2 out and start on them. someone hit a curb hard with them i got most of the curb rash out but there are still some spots. it dose not bug me i got the wheels for $100 i will run them tell i find what i really want and sell them or use them as winter wheel. |
Author: | debow_8787 [ Fri Mar 21, 2014 2:22 am ] |
Post subject: | Re: 4 years later |
well today i got the block back together just need to finish up the head and the motor will be ready to go back in the car. |
Author: | debow_8787 [ Fri Apr 04, 2014 12:41 am ] |
Post subject: | Re: 4 years later |
i picked up a 2g head and sent it off to the machine shop so i am waiting for them to be done with it. |
Author: | aaronsbig16g [ Fri Apr 04, 2014 6:43 pm ] |
Post subject: | Re: 4 years later |
I'm really digging those wheels! |
Author: | debow_8787 [ Fri Apr 04, 2014 11:34 pm ] |
Post subject: | Re: 4 years later |
Quote: I'm really digging those wheels!
thanks man
|
Author: | debow_8787 [ Fri Apr 11, 2014 12:15 am ] |
Post subject: | Re: 4 years later |
i got the head back yesterday and today i got it installed.now it is time to get the new lifters, cams in, and do the timing. |
Author: | xxNocturnalxx [ Fri Apr 11, 2014 10:00 am ] |
Post subject: | Re: 4 years later |
Looking good. Let me know when you plan to do the timing, I'll supervise. |
Author: | debow_8787 [ Mon Apr 14, 2014 11:39 pm ] |
Post subject: | Re: 4 years later |
well got the cams back in i will be doing the timing some time this week or maybe this weekend if you want to come over. I need to get the 2g intake manifold cleaned up and put back on along with the oil pan witch i will do this week as well i think. |
Author: | cheaptalon [ Tue Apr 29, 2014 11:50 am ] |
Post subject: | Re: 4 years later |
How is the fit looking on the front wheels? Did you ever get around to pulling the front fender and lowering the car down? |
Page 3 of 7 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |