4g61t.org
http://www.4g61t.org/forum/

92 AWD Swap From SL,UT
http://www.4g61t.org/forum/viewtopic.php?f=64&t=36997		 Page 1 of 1
Author:  hx40summitawd [ Sun Nov 04, 2012 12:56 pm ]
Post subject:  92 AWD Swap From SL,UT
Hi my name is Josh. I am kinda new to the form i have been a member for a while just watching everyone's builds used all your good tips. Now i am going to share my build.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
while welding the rear end in we had a small fire. oops :o
Image
Image
Image
Image
I got in trouble at work so i had to move it so i made these so i could get it to roll.
Image
Got it home from work. Sucks working on the ground but not much else i could do.
Image
i know a lot of Guys usually just leave the struts like that and call it good. But i didn't feel it was very safe so i did what jafromoblie did on YouTube i follow him on YouTube every step with his colt. So i rebuilt the shock towers just like he did.
Image
Image
Plenty of clearance now.
Image
Image
Image
Image
Image
Image
Image
Image
Author:  GoSloTurbo [ Sun Nov 04, 2012 1:52 pm ]
Post subject:  Re: 92 AWD Swap From SL,UT
wow!! great progress so far!
Author:  hx40summitawd [ Sun Nov 04, 2012 2:07 pm ]
Post subject:  Re: 92 AWD Swap From SL,UT
Next Side
Image
Image
Image
Image
Image
Image
Image
Image
Image
Brake lines are all good to go.
Image
Image
Image
Onto the engine Build
Image
Image
Image
Image
Image
Image
Image
Image
Image
I am broke like everyone else so i decided to just put the engine in the car so i could start on the cross member
Image
Image
As many of you know back when they built these cars they were nice enough to put a second set of holes to make it way easier to make a front cross member
Image
Top one the the factory FWD Cross member bottom is a awd Expo Or Vista crossmember
Image
Image
Image
My dash was cracked like most all are so i decided to build a custom one
Image
Image
Image
The textured stuff you see is Bed Liner I have a sweet hook up.
Image
Image
also did the hole tub of the car after i did the drive line
Image
i used 1g hoops that i cut out of a car in the junk yard.
Image
Image
Image
Image
Image
Image
Image
Image

finally found money to build a head
Image
Image
HX35
Image
Image
ETS short route inter cooler piping kit.
Image
Impreza Bumber fits amazing
Image
Image
my friends dd on the left mine in the middle and his FWD swap on the right
Image
My buddy using his dd to got Drift Triking
Image
if you are not sure what that is check this link out
http://www.youtube.com/watch?v=eNrGwLRDzbE
this is mine that i built
Image
Author:  aaronsbig16g [ Sun Nov 04, 2012 2:24 pm ]
Post subject:  Re: 92 AWD Swap From SL,UT
Wow love all the fab work on this car! Nice job!
Author:  redcoltcr [ Sun Nov 04, 2012 4:58 pm ]
Post subject:  Re: 92 AWD Swap From SL,UT
nice
Author:  Spoolin [ Wed Nov 14, 2012 1:26 am ]
Post subject:  Re: 92 AWD Swap From SL,UT
Thats alot of work, keep it up.
Author:  Evotistical [ Wed Nov 14, 2012 2:17 am ]
Post subject:  Re: 92 AWD Swap From SL,UT
Please use a 1st gen infinity g20, or JDM bumper instead of a subie one. Your body lines don't match up sir :butthead: :partyman:

To bad phoenix is flat, and I lost my feelings of invincibility in my 20's. Because that trike stuff looks amazing. :o
Author:  Coltsfan [ Wed Nov 14, 2012 9:34 am ]
Post subject:  Re: 92 AWD Swap From SL,UT
Awesome build so far, but do you have enough brake hose in the rear?
Author:  hx40summitawd [ Wed Nov 14, 2012 9:36 am ]
Post subject:  Re: 92 AWD Swap From SL,UT
Its funny you say that. The group i go with the average age is 30-35 and the oldest is 50. I think i am the youngest guy in the group. No one is to old to ride a trike. :supz:
Author:  thomcasey [ Wed Nov 14, 2012 10:09 am ]
Post subject:  Re: 92 AWD Swap From SL,UT
I agree with the Infinity G20 bumper. Mine has one, looks nice.

Image
Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/