4g61t.org
http://www.4g61t.org/forum/

Spoolin's 2012 Revival HX52, auto, 8.8 4link now hx40
http://www.4g61t.org/forum/viewtopic.php?f=64&t=35746		 Page 3 of 8
Author:  Spoolin [ Thu Jan 19, 2012 10:30 pm ]
Post subject:  Re: Spoolin's 2012 Revival HX52, auto, 4linked awd
Just arrived home to me auto tcase I purchased off link forums, I had no idea it was painted...
Image
Author:  Spoolin [ Sat Jan 21, 2012 6:55 pm ]
Post subject:  Re: Spoolin's 2012 Revival HX52, auto, 4linked awd
Had to free up room on the lift to work on the race cars, snapped a quick photo. Gone racing for the weekend. Panhard bar kit from. Competition Engineering should be shipped Monday. Put a deposit on an IPT trans yesterday as well :)
Image
Author:  Spoolin [ Tue Feb 07, 2012 1:40 pm ]
Post subject:  Re: Spoolin's 2012 Revival HX52, auto, 4linked awd
Drilled the axles, installed panhard bar. She's officially a roller.
Image
Image
Author:  miragesist [ Tue Feb 28, 2012 10:11 am ]
Post subject:  Re: Spoolin's 2012 Revival HX52, auto, 4linked awd
this inspiring , good luck
Author:  Spoolin [ Thu Mar 08, 2012 9:05 am ]
Post subject:  Re: Spoolin's 2012 Revival HX52, auto, 4linked awd
Lost a bunch of photos, accidentally deleted sd card. IPT mackdaddy transmission and IPT re-stall in the car. You can see how much I had to hack the framerail to get it in there.
Image
Image
Image
Image

Swaintech pc-9 coating applied to piston skirts to band aid my excessive ptw clearance.
Image
Image

I welded a piece I had cut out off the rear floor on the oil pickup, kiggly inspired mod. You can read about it on his site if un-familiar.
Image
Author:  Spoolin [ Thu Mar 08, 2012 9:11 am ]
Post subject:  Re: Spoolin's 2012 Revival HX52, auto, 4linked awd
I assembled the bottom end last night. I measured ptw clearance at .007-.009 before the coating and now it is .003-.004 after having the pc-9 coating applied. I gapped the rings to .022top/.024 bottom.

I also have the gears, 3.31 come factory in some of the newer mustangs. Picked them up for $100 used.
Author:  poorboychevelle [ Thu Mar 08, 2012 10:02 pm ]
Post subject:  Re: Spoolin's 2012 Revival HX52, auto, 4linked awd
http://www.lancerregister.com/showthrea ... 101&page=7

Dude! Not the threadjack but..... Is this the same transfer case? The guys who sold it to you may be legitimately nuts.... if you've never seen this thread, start at the beginning of the linked thread - paints everything, carves up the head with a file, cuts the center out of a sprung clutch plate and welds it into the center of an unsprung 6 puck....

Goodluck and godspeed sir! Good to know that part made it to a better home.
Author:  whe3ls [ Thu Mar 08, 2012 10:11 pm ]
Post subject:  Re: Spoolin's 2012 Revival HX52, auto, 4linked awd
not that car lol. the good times.
Author:  slowdsm [ Fri Mar 09, 2012 2:43 am ]
Post subject:  Re: Spoolin's 2012 Revival HX52, auto, 4linked awd
holy batcrap 70 damn pages... im shocked he didnt paint the crankshaft blue lol



Steve
Author:  Spoolin [ Fri Mar 09, 2012 7:18 am ]
Post subject:  Re: Spoolin's 2012 Revival HX52, auto, 4linked awd
Wow a lot of time into that car, most of it wasted though. My tcase is auto so no chance its the sake one, thanks for sharing the link though.
Author:  Spoolin [ Fri Mar 09, 2012 11:22 pm ]
Post subject:  Re: Spoolin's 2012 Revival HX52, auto, 4linked awd
The old eagle wiseco setup, it dates back to 04'. One rod has been replaced and a few diff blocks, and of course now ceramic coated.
Image
Bolted the head on too. Re-used the felpro MLS with the addition of copper spray and tq'd the l19s to 100ft lbs. Left the intake off because I still have to build a rear engine mount.
Image
Author:  slowdsm [ Fri Mar 09, 2012 11:44 pm ]
Post subject:  Re: Spoolin's 2012 Revival HX52, auto, 4linked awd
looking great man.. cant wait to see it on the road..



Steve
Author:  4G15COLT [ Sun Mar 11, 2012 3:30 am ]
Post subject:  Re: Spoolin's 2012 Revival HX52, auto, 4linked awd
you should look up CL Los angeles an type in te-37 a guy is selling some that 4x100. and he has 2 extra rims I guess he bought em cuz one of his 4x100 is damged. But the other other 2 are 4x114 same rims u got might buy 2 more as spares would be good for u.. ANd good work keep it up
Author:  Spoolin [ Mon Nov 05, 2012 3:10 pm ]
Post subject:  Re: Spoolin's 2012 Revival HX52, auto, 4linked awd
Worked on the car for the first time in over 6mo. Slapped the starter, intake mani, and exh mani. Also set the timing and temp bolted up turbo. Still have a bunch to do and dont want to throw money at it just yet. In the process of buying a house.

Image

Image
Author:  Spoolin [ Tue Nov 06, 2012 12:08 pm ]
Post subject:  Re: Spoolin's 2012 Revival HX52, auto, 4linked awd
Image
Image
Page 3 of 8 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/