4g61t.org

Specializing in the 3g CSM
It is currently Thu Mar 28, 2024 8:28 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 33 posts ]  Go to page 1 2 3 Next
Author Message
 Post subject: slowdsm's build
PostPosted: Wed Mar 16, 2011 6:09 pm 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2141
Location: Tucson Az
well here is the start of it back before they added the build section..

http://www.4g61t.org/forum/viewtopic.php?f=3&t=26327

I havent really done much since then except rewire the whole engine bay harness..deleted alot of the wires...

because yahoo dropped geocities a few years back I lost all my pics from the engine build and stuff.. so figured I would start a new thread since im starting to work on getting the race head and turbo installed in the next few months.. then working on the awd finally... so on to it..



Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Top
   
 Post subject: Re: slowdsm's build
PostPosted: Wed Mar 16, 2011 6:22 pm 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2141
Location: Tucson Az
first off.. BIG props to chris. 89mirageman for alot of my parts to do the front 5 lug brake conversion with elantra LCA's.. 2 piston brake calipers that he rebuild and painted for my.. got my fresh rebuild hubs back today they will get painted this week so they will be ready to go.. just need to get some rotors and pads then the swap begins..

fist off I thought I could be good like chris and paint something nice... HAHAFUCINGHA...not a chance.. he is a god when it comes to cleaning and painting stuff.. here is my attempt..

this is my dumptube...going to also be doing intake..valve cover and all ic piping this color..itws the candy blue.. to many people use the purple so I went blue.. think it will look nice with the white car

Image

Image


Looks good huh... well It was dry to touch so I laid it down to take pics.. BIG mistake lol.

Image

thank god its on the back side so wont be seen..

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Last edited by slowdsm on Wed Mar 16, 2011 6:27 pm, edited 1 time in total.

Top
   
 Post subject: Re: slowdsm's build
PostPosted: Wed Mar 16, 2011 6:26 pm 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2141
Location: Tucson Az
turbo setup and some brake parts.

Image

Image

Image

Image

Image

Image

Image

I will post up some pics of the hubs once I get them painted...along with the intake and VC when there done.

its been a few years since ive done any work/updates.. now im doing 2 at once lol.. this will give us 4 now in our group down here.. so when we roll into a place..we dont have bmw's but we roll in style and fast lol.


Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Last edited by slowdsm on Wed Mar 23, 2011 3:15 am, edited 1 time in total.

Top
   
 Post subject: Re: slowdsm's build
PostPosted: Wed Mar 16, 2011 9:20 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
Looking good so far man! Just sand and feather edge that pipe and repaint it and you'll be good. I always grab a few rolls of wax paper from the dollar store, its the perfect thing to lay parts on that aren't 100% dry.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
 Post subject: Re: slowdsm's build
PostPosted: Thu Mar 17, 2011 1:17 am 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Jan 05, 2004 12:30 pm
Posts: 302
Location: Tucson AZ
Lookin good man, Looks like the warm weather has got you building up a storm!

_________________
87 Starion, PROJECT. With the CATAPLT COLT engine, Thanks Craig, (GSX)
92 Eclipse GSX (Dead)
89 Colt GT (AWD Swap) H1C
88 Cummins Suburban
69 Cutlass convertible
78 Arrow G54B Swap, Celeste makeover. (MOD 2016 Veteran)


Top
   
 Post subject: Re: slowdsm's build
PostPosted: Tue Mar 22, 2011 3:19 am 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2141
Location: Tucson Az
few more pieces to my brakes are completed.. just need rotors and pads then I can swap it all..

Image

and heres the crappy intake paint job. I think I might strip it and have it powder coated instead.

Image

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Top
   
 Post subject: Re: slowdsm's build
PostPosted: Tue Mar 22, 2011 12:48 pm 
Offline
Some call me a god
User avatar

Joined: Wed Oct 15, 2008 10:34 am
Posts: 2753
Location: Cincinnati
That is a good shade of blue.


Top
   
 Post subject: Re: slowdsm's build
PostPosted: Tue Mar 22, 2011 11:31 pm 
Offline
Member
User avatar

Joined: Thu Nov 12, 2009 9:58 pm
Posts: 85
Location: tucson,az
too really get the blue into it you have to let the manifold soak overnite in a bucket of carb cleaner then rinse/wash with hot soapy water and air blow dry, then paint it when done you shoot some clear over it and it looks like its still wet after it dries, but your not a wall tagger dude so we understand, but looks good any way, glad your making progress


Top
   
 Post subject: Re: slowdsm's build
PostPosted: Wed Mar 23, 2011 12:45 am 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2141
Location: Tucson Az
machine shop cleaned it spotless.. I did 2 coats of base color... and 2 coats of the candy blue.. then 3 coats of clear... on both the pipe and the intake.. I am not into making my car fancy just fast.. so this was a trial thing for me lol.. im still not sure I like the intake.. i want it all to look like the wastegate.. but if not ill go all black and race it that way lol. :axe: :finga:



Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Top
   
 Post subject: Re: slowdsm's build
PostPosted: Sat Apr 23, 2011 8:06 pm 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2141
Location: Tucson Az
so I installed the front dsm big brakes today with thanks to moidsm1 for loaning me the big rotors and some 5 lug rims untill I can afford my own..got the elantra LCAs installed also.. reamed out the top of the dsm knuckle for the tie rod end to sit on top pointing down like the stock colt does.. took all of 2 min per side lol...while in there I noticed both my sway bar bushing that mount it to the fire wall were completely missing.. so I yanked it out.. now to find a elantra one to install.. looks pretty nice sitting in there.. also I took a pic of the front kyb/agx fronts where I put on some cheap 40 ebay coilovers.. it actually rides pretty nice.. rides softer than with the eibach pro springs that was on it.. I was shocked..once I get the exhaust system fixed so I can lower the car ill put the rear setup on to test it out.. and post pics.. for now heres the front end.

and yes when I have the wheel on..and sitting on the ground the spring sits down on the bottom.. next step is to cut the strut so I can lower it more...and make room for some bigger tires.

Image

Image

Image

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Top
   
 Post subject: Re: slowdsm's build
PostPosted: Sun Apr 24, 2011 7:03 pm 
Offline
Some call me a god
User avatar

Joined: Mon Dec 26, 2005 2:20 am
Posts: 1154
Location: Anderson, IN
Brakes are looking good!

_________________
92 Colt GL 4g63t + AWD swap
00 Mirage LS


Top
   
 Post subject: Re: slowdsm's build
PostPosted: Mon Apr 25, 2011 9:51 am 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Jan 05, 2004 12:30 pm
Posts: 302
Location: Tucson AZ
Im glad somebody in Tucson is getting some work done! Ive been so busy working on house crap!

_________________
87 Starion, PROJECT. With the CATAPLT COLT engine, Thanks Craig, (GSX)
92 Eclipse GSX (Dead)
89 Colt GT (AWD Swap) H1C
88 Cummins Suburban
69 Cutlass convertible
78 Arrow G54B Swap, Celeste makeover. (MOD 2016 Veteran)


Top
   
 Post subject: Re: slowdsm's build
PostPosted: Wed Dec 14, 2011 11:37 pm 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2141
Location: Tucson Az
small update.. picked up a awd auto trans and a few other parts for my awd swap..

also just picked up this new treadstone ic..its larger than the 1 I have now.. so it will be a easy direct bolt on.just need new ic piping as its 3" and current is 2 1/2.. it supports up to 1000 hp (supposably)..got it from a local guy here in town.

Image

here is the same one on ebay if anyone else wants one.

http://www.ebay.com/itm/TRV25S-Treadsto ... 67&vxp=mtr



Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Top
   
 Post subject: Re: slowdsm's build
PostPosted: Thu Dec 15, 2011 6:56 am 
Offline
Some call me a god
User avatar

Joined: Wed Oct 15, 2008 10:34 am
Posts: 2753
Location: Cincinnati
I would love to have one of these. But not for $410....


Top
   
 Post subject: Re: slowdsm's build
PostPosted: Thu Dec 15, 2011 12:37 pm 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2141
Location: Tucson Az
I traded my brake setup and 100.00 for it.. he was only asking 300 for it and its never been installed.




Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 33 posts ]  Go to page 1 2 3 Next

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 41 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited