4g61t.org http://www.4g61t.org/forum/ |
|
whe3ls's hyundai http://www.4g61t.org/forum/viewtopic.php?f=64&t=33426 |
Page 1 of 19 |
Author: | whe3ls [ Sat Sep 18, 2010 4:33 am ] |
Post subject: | whe3ls's hyundai |
here is my 93 elantra gls, im going to be doing a 5 lug swap along with 4wheel disc brakes, i want to awd swap but i need to figure that one out still. if i do it, it most likely with a solid axle form a d50, i also want to stiffen up the chassis, by re doing the stock frame rails 2 inch x 1inch square tubing and some other things my nice little 1.8 i had to put head studs in cuz the stock head bolt had been reused did want to take anychances and my parts car,90 awd, im trading the diff t case and trans for a 91 6botl turbo bottom end |
Author: | pimpy rider [ Sun Sep 19, 2010 10:08 am ] |
Post subject: | Re: whe3ls's hyundai |
This got me more pumped to work on mine. |
Author: | whe3ls [ Mon Sep 20, 2010 12:11 am ] |
Post subject: | Re: whe3ls's hyundai |
thats good. if the weather is nice this coming firday im going to see how slow my car it. |
Author: | moidsm1 [ Mon Sep 20, 2010 5:09 pm ] |
Post subject: | Re: whe3ls's hyundai |
This is going to be a great car. I am finishing the bugs on my Excel. Gonna drop in the Walbro today, so I can boost without fear of running lean from the Hyundai Fuel Pump. |
Author: | Incoltnito [ Tue Sep 21, 2010 12:46 am ] |
Post subject: | Re: whe3ls's hyundai |
Quote: thats good. if the weather is nice this coming firday im going to see how slow my car it.
You know it and I know it too....winter is coming, and we're pretty much screwed. I just put off buying that 89 colt in the valley with the 4g61 in it, solely cause the season is changing too rapidly for me to do a swap outside.
|
Author: | whe3ls [ Tue Sep 21, 2010 8:13 am ] |
Post subject: | Re: whe3ls's hyundai |
Quote: Quote: thats good. if the weather is nice this coming firday im going to see how slow my car it.
You know it and I know it too....winter is coming, and we're pretty much screwed. I just put off buying that 89 colt in the valley with the 4g61 in it, solely cause the season is changing too rapidly for me to do a swap outside.i know winters coming, but i have a nice shop to work in. i have another project i have to finish. |
Author: | Incoltnito [ Wed Sep 22, 2010 7:48 pm ] |
Post subject: | Re: whe3ls's hyundai |
A nice shop is just the key! Liking the Rx...keep me posted. |
Author: | whe3ls [ Wed Sep 22, 2010 11:17 pm ] |
Post subject: | Re: whe3ls's hyundai |
Quote: A nice shop is just the key! Liking the Rx...keep me posted.
i sent you a pm |
Author: | whe3ls [ Sun Sep 26, 2010 9:03 pm ] |
Post subject: | Re: whe3ls's hyundai |
well i made my car sound like a honda, but now i can chirp my tires going into overdrive and when launching, my muffler had several holes in it, and made the the car sound bad |
Author: | whe3ls [ Thu Oct 07, 2010 8:29 am ] |
Post subject: | Re: whe3ls's hyundai |
i cut up my 90 turbo harness so i could get the injector wiring and resistor pack, i also cut out the turbo maf plug and cas plug. full 90 engine harness what i started with my mess what i needed whats left also here is want ive been thinking for the rear axle, the setup will be close to whats in the awd colts. not mine, its a pic of the C83A Cyborg rear axle |
Author: | moidsm1 [ Thu Oct 07, 2010 10:30 pm ] |
Post subject: | Re: whe3ls's hyundai |
My 91 Excel doesnt have Struts like that, Does an Elantra come with rear struts? Check my build page for a pic of what my rear trailing arms look like. Hopefully you were blessed with a strut setup! |
Author: | whe3ls [ Fri Oct 08, 2010 8:50 am ] |
Post subject: | Re: whe3ls's hyundai |
the rear is like the 1g dsm's so yes i have struts |
Author: | whe3ls [ Tue Oct 12, 2010 5:43 am ] |
Post subject: | Re: whe3ls's hyundai |
i started working on my gls today. i pulled the ac out and started to do a emissions and vac delete. i also think my car has 1.6 head. |
Author: | whe3ls [ Fri Oct 15, 2010 10:49 pm ] |
Post subject: | Re: whe3ls's hyundai |
well i think my 4g67 my have given up. it doesnt want to start |
Author: | 89D15CRX [ Sat Oct 16, 2010 8:48 am ] |
Post subject: | Re: whe3ls's hyundai |
Well let's see buddy...you ripped out the EGR valve AND the stock intake system as well as added wires to the harness . Did you install those plugs and resistor pack from the turbo harness? Check your connections if you did and see why it won't start (ie no spark, no fuel, and so on). BTW that first line was a joke... Let's try to walk through this and see what the problem is. |
Page 1 of 19 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |