4g61t.org

can anyone tell me if a 2nd gen dsm shaft will work for me? I have a 92 colt with 4g63t with a fwd dsm trans and original colt turbo axles. Any help is appreciated thanks.

Your factory turbo axles will work with the Dsm trans....if that helps

_________________
_____________________
1993 single turbo supra
2000 Lexus sc300
2016 ram 1500

I'm not sure if a 2g will work, the transmissions are different than the 1g trans. It can't be that hard to find a 1g halfshaft.

_________________
Had a:
1991 Eagle Summit ES Hatchback - 4g15 12v 5spd
1991 Dodge Colt -4g15 12v 4spd
Have a:
1978 Oldsmobile Cutlass - 468BBO TH350
Round 3:
1990 Dodge Colt-4G63T 5spd

one more question, how thick of spacers do I need to make up for the lack of ac bracket?

I usually just trim the corner of the ac bracket off and use that as the spacer.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual

Use the trimmed a/c bracket or hardened washers. They absolutely have to be hardened washers too, no 5cent regular washers. There's no real set amount of spacing, add/subtract washers until the shaft is spinnable by hand with it bolted down.

_________________
Had a:
1991 Eagle Summit ES Hatchback - 4g15 12v 5spd
1991 Dodge Colt -4g15 12v 4spd
Have a:
1978 Oldsmobile Cutlass - 468BBO TH350
Round 3:
1990 Dodge Colt-4G63T 5spd

If someone had the bracket lying around, they could measure the depth of the hole?

OEM AC bracket thickness = 8mm

8mm SS spacers torqued 29/39 ft.lbs ( FSM )

^^^ Awesome!!!