4g61t.org

Specializing in the 3g CSM
It is currently Thu Oct 30, 2025 4:48 pm

All times are UTC-05:00




Post new topic  Reply to topic  [ 13 posts ] 
Author Message
 Post subject: Tubo's on the 1.5
PostPosted: Wed Dec 31, 1969 7:00 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Oct 28, 2002 10:33 am
Posts: 216
Well finally installed the turbo on my Colt this weekend. Took 12hrs to finish the adaptors and mainifold modifications. Heres a list of what i put on.

14b turbo
2g I/C
2 1/2 I/C piping
1g BOV
Stock DSM exhaust(will upgrade when i have more time)
4g Colt A/C fan (2" slimmer)
275cc injectors
1g Turbo DSM fuel pump
SAFC
Boost guage

Still need to get my datalogger working on it, and build a boost contorler. EGT will go on it on wedensday as the probe broke when i was installing it. It's only holding about 4-5 psi right now, going to run around 8psi. I'll post some pics when i get the film developed.(anyone know a good place to host them?)


Top
   
 Post subject:
PostPosted: Wed Dec 31, 1969 7:00 pm 
Offline
CSM Junkie
User avatar

Joined: Sun Jan 20, 2002 7:00 pm
Posts: 767
Location: Montreal, Quebec, Canada
cant wait to see this man! 12hrs you are the speedy gonzalez of the mecanic


Top
   
 Post subject:
PostPosted: Wed Dec 31, 1969 7:00 pm 
Offline
CSM Expert
User avatar

Joined: Mon Mar 04, 2002 7:00 pm
Posts: 2952
Location: Waterloo, ON Canada
Ricehunter email them to me I can host them off my site..

I'm moving all my pics of webshots onto my domain in the next day or so.


Top
   
 Post subject:
PostPosted: Wed Dec 31, 1969 7:00 pm 
Offline
CSM Expert
User avatar

Joined: Mon Mar 04, 2002 7:00 pm
Posts: 2952
Location: Waterloo, ON Canada
Rice:

Also forgot to ask where id you end up stealing the oil feed from?


Top
   
 Post subject:
PostPosted: Wed Dec 31, 1969 7:00 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Oct 28, 2002 10:33 am
Posts: 216
Took it off the pressure sending unit hole. Tested it first and it had lots of supply.


Top
   
 Post subject:
PostPosted: Wed Dec 31, 1969 7:00 pm 
Offline
CSM Expert
User avatar

Joined: Mon Mar 04, 2002 7:00 pm
Posts: 2952
Location: Waterloo, ON Canada
Rice:

Sweet email me some pics i wanna see :)


Top
   
 Post subject:
PostPosted: Wed Dec 31, 1969 7:00 pm 
Did you build your own manifold?


Top
   
 Post subject:
PostPosted: Wed Dec 31, 1969 7:00 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Oct 28, 2002 10:33 am
Posts: 216
It was easier to mod one to fit. I had all the stuff bought to build one but found one to mod, not as nice as i could have built but way less work. I was doing this whole project out of stuff i had laying around form my Talon and what i could buy for real cheap, cause i'm a cheap ass. Anyway it might not look as nice as some but it works very well. I'll get the pics out as soon as i'm done taking pics on the film and develope it. Shoul;d be in the next few days. :)


Top
   
 Post subject:
PostPosted: Sun Dec 08, 2002 11:50 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Oct 28, 2002 10:33 am
Posts: 216
Here's the pics i promised you guy's. The I/C will either be moved or jacketed for water/air. Just remember it was a cheap and easy install just to see if it could be done. :) http://www.nacdsm.org/gallery/view_albu ... nterbeater (If you click on the photo after it opens it will open larger.)


Top
   
 Post subject:
PostPosted: Mon Dec 09, 2002 8:22 am 
Offline
CSM Expert
User avatar

Joined: Mon Mar 04, 2002 7:00 pm
Posts: 2952
Location: Waterloo, ON Canada
Sweet Man!


Top
   
 Post subject:
PostPosted: Mon Dec 09, 2002 9:27 pm 
Offline
CSM Expert
User avatar

Joined: Sun Jan 06, 2002 7:00 pm
Posts: 1792
Location: Perth, Australia
ditto that - good job! How does it run?


Top
   
 Post subject:
PostPosted: Mon Dec 09, 2002 9:47 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Mon Oct 28, 2002 10:33 am
Posts: 216
It's running very well, still need to get the wideband on it to tune it properly. I'm running 8psi right now until i get my water injectin kit on. And the 5 speed tranny will be going on in the next week or 2, just can't get used to the auto i need to hear some syncros grinding. :twisted:


Top
   
 Post subject:
PostPosted: Mon Dec 09, 2002 11:16 pm 
Offline
Restricted Newbie

Joined: Mon Dec 09, 2002 12:29 pm
Posts: 5
hie mr.rice hunter.........I would really appreciate it if u could give me some pointers on how to turbocharge my engine cause its exactly the same as yours but people here say it will blow running 6-7psi.........pls enlighten me

i private msg u...thanks


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 13 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited