except it doesn't help if you miss a gear and go into 2nd instead of 4th - hello 10k+ rpm and 16 bent valves...
| 4g61t.org http://www.4g61t.org/forum/ |
|
| REV LIMITER http://www.4g61t.org/forum/viewtopic.php?f=6&t=2509 |
Page 1 of 1 |
| Author: | homer simpson [ Wed Dec 31, 1969 7:00 pm ] |
| Post subject: | REV LIMITER |
yes well, I have a 90 ECU and am wondering where factory rev limiter is, or if ther is one? I ask since it seems like I can't hit it. I can be driving around and I'll be watching the tach go into the 8K+ range as I shift. Obviously I don't want my motor to throw a piston through an oil pan, which is why I ask. I think I may have hit it once, but was not watching the tach, It felt like I was wheel hopping (the same sensation) but no tire noise. I was thinking...........hmm, was that revlimiter? because the bounces were far apart, bam.........bam..........bam. Whereas when I bounced these other hondas of of limiter they went bam.bam.bam.bam. thoughts......... |
|
| Author: | Ricehunter [ Sun Dec 08, 2002 6:06 pm ] |
| Post subject: | |
Your tach is wrong, factory rev limiter is set to come on at 7200 and compleate fuel+spark cut at 7500. Unless you have TMO moded ecu. |
|
| Author: | Berserko [ Sun Dec 08, 2002 6:49 pm ] |
| Post subject: | |
Or a JDM ecu some of the JDM ecus have no rev limiter set... |
|
| Author: | Jeza [ Mon Dec 09, 2002 6:18 am ] |
| Post subject: | |
i've got a jdm 4g61t and have had it upto about 7500 rpm with no sighn of a rev limit yet |
|
| Author: | adamrx7 [ Mon Dec 09, 2002 8:05 am ] |
| Post subject: | |
When I bouth my Colt I was told it had a different ECU in it and I've had the old 1.6 to way over 8 grand so I belive it. When I put the 90 ECU in I now cant fgo over like 7500, Ive hit fuel/spark cut racing and it sucks Im going to have a TMO by spring. |
|
| Author: | homer simpson [ Mon Dec 09, 2002 4:05 pm ] |
| Post subject: | |
hey, stupid question, but, is revlimiter still in effect if the clutch is depressed? |
|
| Author: | Guest [ Mon Dec 09, 2002 6:13 pm ] |
| Post subject: | |
yep |
|
| Author: | xlr8 [ Mon Dec 09, 2002 9:42 pm ] |
| Post subject: | |
except it doesn't help if you miss a gear and go into 2nd instead of 4th - hello 10k+ rpm and 16 bent valves...
|
|
| Author: | Guest [ Mon Dec 09, 2002 9:57 pm ] |
| Post subject: | |
I went to first once instead of going to 3rd.... Doh. I'm positive it saw 10K rpm. The car still runs fine, but I did catch it immediately. |
|
| Author: | CyborgNZ [ Tue Dec 10, 2002 6:00 pm ] |
| Post subject: | |
Hmmm I do not hit the Rev Limiter very frequently in my cyborg, I find the limit changes depending on conditions, for example if I am Front Wheel Drifiting it round a corner I get the cut out at 7200 and its a nice bouncing cut out. Where as if I am ringing the tits out of it on the quarter mile it will go all the way to 8K. Odd I know, but thats what I see. |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|