| 4g61t.org http://www.4g61t.org/forum/ |
|
| 4G63T IN 93 MIRAGE COUPE http://www.4g61t.org/forum/viewtopic.php?f=6&t=24594 |
Page 1 of 1 |
| Author: | DSMJAMES [ Mon Mar 24, 2008 12:10 pm ] |
| Post subject: | 4G63T IN 93 MIRAGE COUPE |
ok i have a question. i have done the awd 4g63t swap on a 89 colt hatch. is the wiring the same, engine harness wise. on the 93 mirage coupe? |
|
| Author: | CaptainTonus [ Mon Mar 24, 2008 12:19 pm ] |
| Post subject: | |
No. |
|
| Author: | Flying Eagle [ Mon Mar 24, 2008 1:20 pm ] |
| Post subject: | |
Everything changed just enough to make it a slightly different car inside/outside. The 1.5 litre in a 93 was MAP based so wiring will be different for the interface and connectors from that end. Check the pinouts from a 93 ECU - might be listed here: Click Me |
|
| Author: | MR HYDE [ Mon Mar 24, 2008 1:56 pm ] |
| Post subject: | |
My 94 LS coupe..... http://s4.photobucket.com/albums/y141/g ... rage%20LS/ |
|
| Author: | DSMJAMES [ Mon Mar 24, 2008 2:18 pm ] |
| Post subject: | ... |
so does anyone have any good info on the wiring of the harness inside the car to give the mpi relay power? |
|
| Author: | Flying Eagle [ Mon Mar 24, 2008 2:52 pm ] |
| Post subject: | |
Use the factory manual and find the wires that are live from the ignition switch when the key is in the "run" position, and the start wires to connect that part of the system, and you are a go. It's all detailed in the manual as to what wires are power or not at various points of key function. |
|
| Author: | DSMJAMES [ Mon Mar 24, 2008 3:44 pm ] |
| Post subject: | |
Quote: Use the factory manual and find the wires that are live from the ignition switch when the key is in the "run" position, and the start wires to connect that part of the system, and you are a go. It's all detailed in the manual as to what wires are power or not at various points of key function.
thanks for the help man
|
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|