4g61t.org

Specializing in the 3g CSM
It is currently Thu Oct 30, 2025 1:28 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Starter Issues
PostPosted: Thu Jul 06, 2006 7:59 am 
Offline
Restricted Newbie

Joined: Tue Mar 16, 2004 10:36 am
Posts: 10
Location: Trinidad W.I.
hey guys ...im almost at the end of my rope here...im just finishing my auto to manual tranny swap got the km210 turbo tranny and had it installed ...clutch working fine everything lined up perfectly shifter working great ..and when im ready to turn my key ..the starter just spins and no turn over...i initially used the Auto starter ...and i thought that was the problem ..so i went out and got the manual starter ...same problem ..it almost seems like the starter is not reaching the flywheel ....HELP!! :cry: ..i kicked started the car and it started fine ..and drove fine .....so i know that everything else is installed properly...

_________________
Dont Ask me what my Quarter mile time is. Meet me on the stretch.


Top
   
 Post subject:
PostPosted: Thu Jul 06, 2006 8:42 am 
Offline
CSM Junkie
User avatar

Joined: Mon Nov 05, 2001 7:00 pm
Posts: 785
Location: pa
what starter plate did you use?


Top
   
 Post subject:
PostPosted: Thu Jul 06, 2006 9:20 am 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
Which flywheel also?

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
 Post subject:
PostPosted: Thu Jul 06, 2006 9:22 am 
Offline
CSM Junkie

Joined: Fri Nov 02, 2001 7:00 pm
Posts: 457
Location: Stewartstown PA USA
It sounds like you are useing a flywheel from an AWD car ?


Top
   
 Post subject:
PostPosted: Thu Jul 06, 2006 9:48 am 
Offline
CSM Junkie
User avatar

Joined: Mon Nov 05, 2001 7:00 pm
Posts: 785
Location: pa
Quote:
It sounds like you are useing a flywheel from an AWD car ?
what he said also.
happen to me the first time. had gotta a
awd flywheel not knowing what the difference was
back then.


Top
   
 Post subject:
PostPosted: Mon Jul 10, 2006 7:23 am 
Offline
Restricted Newbie

Joined: Tue Mar 16, 2004 10:36 am
Posts: 10
Location: Trinidad W.I.
im absolutely sure that the flywheel is the correct FWD flywheel...and im using the manual plate ....that i took off another engine that i had on the ground that came with a gearbox FWD...im just wondering is there differences in the starters ..that would not allow them to reach the flywheel.....im not sure that the starter is from the 4g61T ...MAY HAVE COME OFF THE 4G63 N/A ....[PLEASE ADVISE]..

_________________
Dont Ask me what my Quarter mile time is. Meet me on the stretch.


Top
   
 Post subject:
PostPosted: Thu Mar 15, 2007 2:09 pm 
Offline
CSM Junkie
User avatar

Joined: Tue Dec 07, 2004 7:52 pm
Posts: 537
Location: Aurora, CO
Is the 1.8 starter and a 1.6/2.0 starter different?

_________________
George
1989 Black Original Turbo Mirage v2.0 awd
1989 Black Original Turbo Mirage v1.6 fwd
1997 Nissan 240sx
1970 Datsun 240z


Top
   
 Post subject:
PostPosted: Thu Mar 15, 2007 7:26 pm 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Wed Jun 22, 2005 11:03 am
Posts: 253
Location: Auburn, AL
Quote:
Is the 1.8 starter and a 1.6/2.0 starter different?
yes they are. They have different part #'s in CAPS.

The 2.0L NT and 2.0T may be different. I thought they were the same. I really need a GS-T and GS vin to make sure because I cant tell why theres so many options for starters when I look up a D22A (1g FWD NT/Turbo). The FWD turbo and AWD starters are the same for sure.

_________________
2003 Evo, 89 Mirage Turbo, 88 Conquest 4G64


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited