yes..Im using a 2.0 tranny though. Redsleeper broke his at the shootout last year and he bought a 1g from the parts store and it worked fine as far as I know He was using the 1.6 tranny. Maybe you should pm him and ask him.
| 4g61t.org http://www.4g61t.org/forum/ |
|
| axle info http://www.4g61t.org/forum/viewtopic.php?f=6&t=19798 |
Page 1 of 1 |
| Author: | sleeper4g63 [ Fri Dec 22, 2006 5:00 pm ] |
| Post subject: | axle info |
What's up guys, just wanting to know will the axle on the driver sidefrom the 1g's work with our half shafts, mine broke today so i need one fast and have access to one, someone please let me know. it broke at the wheel. |
|
| Author: | sleeper4g63 [ Fri Dec 22, 2006 5:08 pm ] |
| Post subject: | |
i mean the short axle on the driver side |
|
| Author: | 89coltgt [ Fri Dec 22, 2006 6:20 pm ] |
| Post subject: | |
The outside axle or intermediate axle that bolts to the block? |
|
| Author: | sleeper4g63 [ Fri Dec 22, 2006 9:21 pm ] |
| Post subject: | |
its the actuall axle on the driver side, the half axle |
|
| Author: | sleeper4g63 [ Sat Dec 23, 2006 4:08 pm ] |
| Post subject: | |
its the outer axle,some reason it pulled out of the boot at the intermediate shat, any info by tonight would be greatly appreciated so i can go to the junkyard tomorrow and get one.need my car by wednesday to go to work, thanls, aron |
|
| Author: | t2fastalon [ Sat Dec 23, 2006 7:08 pm ] |
| Post subject: | |
yes it will work. I have one in mine. |
|
| Author: | sleeper4g63 [ Thu Dec 28, 2006 1:58 pm ] |
| Post subject: | |
so you used the long axle, not the half shaft, i still have the 1.6 tranny |
|
| Author: | t2fastalon [ Thu Dec 28, 2006 3:57 pm ] |
| Post subject: | |
yes..Im using a 2.0 tranny though. Redsleeper broke his at the shootout last year and he bought a 1g from the parts store and it worked fine as far as I know He was using the 1.6 tranny. Maybe you should pm him and ask him.
|
|
| Author: | customthecoltgt [ Thu Dec 28, 2006 5:39 pm ] |
| Post subject: | |
how broke is it can it be rebuilt. |
|
| Author: | LILEVO [ Thu Dec 28, 2006 7:48 pm ] |
| Post subject: | |
I can't imagine them working, I thought a 1G axle was even longer than the 1.6L axle. I remember hearing people talking about how they would bind up because they were too long. |
|
| Author: | sleeper4g63 [ Thu Dec 28, 2006 8:10 pm ] |
| Post subject: | |
i did some searching and found my answer, it didn't snap, for some reason it pulled out of the cup at the intermediate shaft and the bearings came off. |
|
| Author: | Red Sleeper [ Fri Dec 29, 2006 1:06 am ] |
| Post subject: | |
I did break my stock 2 piece drivers side axle at the shoot out.. I went and bought a axle for a 90 FWD turbo DSM and it worked just great. Actually. its still in my car. NEVER had a problem with it. Hope this helps. |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|