4g61t.org
http://www.4g61t.org/forum/

A-Pillar Pods
http://www.4g61t.org/forum/viewtopic.php?f=6&t=119		 Page 1 of 1
Author:  BluFalcon [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 
Anyone have any idea as to what A-Pillar pods might work with the Colt/Mirage? I have some gauges in Autometer Gauge Cups..but would rather have them mounted up on the pillar. Maybe something from the Honduh or Miatas..would work. Any ideas?
Author:  1lowcolt [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 
1G talon is an almost perfect fit!
Author:  TurboSummit [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 
Not really. I took an autometer 1g dual pod and did some reshaping with a propane torch. You really gotta reshape the bottom angle quite a bit to really get it to match the pillar but I got mine almost perfect. I got access to a digital camera so Ill try to get a pic for everyone to see it.
Author:  1lowcolt [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 
You have to realize that the don't fit that well in talons either
Author:  TurboSummit [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 
Autometer pods fit PERFECTLY in 1gs. I bet since your in Canada your A-pillar trims are shaped differently being that your cars dont have automatic seat belts.
Author:  BluFalcon [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 
I saw a picture of a Miata with an A-pillar pod in a magazine..and noticed that it was about as wide and as flat the Mirage A-pillar. I was just wondering if anyone had tried to match either a Miata or Honduh type Gauge Pod to fit. I have a old 1Gen Talon Pod..but I don't think it's gonna fit on my A-pillar without some Major reshaping. You used a propane torch? :smile: Wow. Post ups ome pics..I'd like to see it. Ah well..I suppose I can mount the Autometer Guge cups irectly to the A-pillar trim instead. Pisser.
Author:  Starquest aka AndyR [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 
You wouldn't believe it, but the autometer pillar mounts from a 82-85 starion/conquest (the ones without the fender flares) fit perfectly. I have one, and it needed absolutely NO reshaping to mount it.

edit: I had this from when I had a conquest, and I do not know if they are still availble for sale though....

<font size=-1>[ This Message was edited by: Starquest aka AndyR on 2001-11-19 15:37 ]</font>
Author:  1lowcolt [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 
That might be it, because I own both a 1G and my colt, and i can tell you that they don't fit that well on either!
Author:  BluFalcon [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 
AndyR
Wouldn't the A-Pillar pods for the 82-85 and 86-89 (widebody) Starquests be the same? I mean aside from the changes to the sheetmetal, and engine..nothing else was changed..right? LoTek still makes a gauge pod for the Starquest I believe..hmm gonna have to go check their website now. http://www.gaugepod.com is the site I believe.
Author:  LILEVO [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 
Ordered one from carparts.com once, came in a box saying it was from a 97 Accord. Worked pretty damn well.

Jason
Author:  Starquest aka AndyR [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 
Hey BluFalcon, actually another change was the automatic seatbelts, the widebody had them and the narrow body did not. I think there might have been a year where the narrow body did have them, but I am not sure. anyway, my pod is from the A-pillar of a starion that does NOT have the automatic seatbelts... That should help. :smile:
Author:  elmer20 [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 
I have a 2G dual pods, I'll try to check for fitment.

http://community.webshots.com/user/mx5rcr
Author:  BluFalcon [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 
Going back to what AndyR said about the pods from a early Starion/Conquest fitting on the Mirage/Colts:

I couldn't find anyone who made A-Pillar pods for for StarQuests, other than the later models with automatic seatbelts. However..VDO has a listing in their catalog for both early StarQuests and later "widebody" ones. the part # for the early StarQuest cars is: 240 314 for single pods, and 240 315 for dual pods. They also show a listing for a holder which replaces the factory clock, that holds two gauges 240 321. I have no idea if this will work with our cars or not. I'm gonna take a look at Summit's website..and see if I can get a price for these things..or to see if they're still available.
Author:  BluFalcon [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 
Well so much for that idea.....

Summit says they're out of stock on all VDO A-Pillar Pods. They say you can place an order for one..and they'll ship it when it comes in. Riiiiggghhht. Checked VDO's website..and they don't even have a listing for A-Pillar pods anymore. Guess my Catalog was just a little too old. Damn...
Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/