| 4g61t.org http://www.4g61t.org/forum/ |
|
| 11.8 @ 125 My awd mirage http://www.4g61t.org/forum/viewtopic.php?f=44&t=38470 |
Page 1 of 1 |
| Author: | RedTsi [ Mon Dec 23, 2013 1:40 am ] |
| Post subject: | 11.8 @ 125 My awd mirage |
Hey guys first of all car made 500 awhp on last Tuesday on a td06h 20g frame with a 35r compressor wheel. Went on Wednesday to my local dragstrip and went 11.8 granny shifting beacuse im having clutcg drag on a Quartermaster and the gears won't go at high rpms. Im really happy with how she did car is a low 11's With the proper shifting. Anyways heres the video and dyno graph. BTW: let me know what you think about the goddamn clutchdrag on a twin disc.  http://youtu.be/fkG54AXdTSs |
|
| Author: | slowdsm [ Mon Dec 23, 2013 2:22 am ] |
| Post subject: | Re: 11.8 @ 125 My awd mirage |
very nice and grats... what gas are you running? pump or e85. Steve |
|
| Author: | RedTsi [ Mon Dec 23, 2013 2:48 am ] |
| Post subject: | Re: 11.8 @ 125 My awd mirage |
Thanks!! It made 414 on 91 and 500 on C16 |
|
| Author: | Flying Eagle [ Mon Dec 23, 2013 7:21 am ] |
| Post subject: | Re: 11.8 @ 125 My awd mirage |
Warped plates. Normal slip when city driving, they sometimes do not like from what anectodal stories I have read. Was the assembly used? How many miles since install? Daily driver? |
|
| Author: | RedTsi [ Tue Dec 24, 2013 4:44 am ] |
| Post subject: | Re: 11.8 @ 125 My awd mirage |
Clutch is new and car is not my DD. Planning on ordering the oem master and braided line from master to slave |
|
| Author: | Flying Eagle [ Tue Dec 24, 2013 6:54 pm ] |
| Post subject: | Re: 11.8 @ 125 My awd mirage |
Maybe not full dis-engagement due to weak older hyrdaulics. My trans shifted before clutch mods, but once the ACT was installed, I had to upgrade. Do you have a stainless clutch line setup? Highly recommended! |
|
| Author: | LILEVO [ Tue Dec 24, 2013 8:48 pm ] |
| Post subject: | Re: 11.8 @ 125 My awd mirage |
You only need a short length of braided for the piece in between the firewall and the slave. In order to shift at high rpm consistently you really need an ignition/clutch switch interrupt. Can be done a few different ways. |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|