nothing there
| 4g61t.org http://www.4g61t.org/forum/ |
|
| Is this a good wheel for a slick? http://www.4g61t.org/forum/viewtopic.php?f=44&t=35051 |
Page 1 of 1 |
| Author: | 89turbocoltsl [ Fri Jul 15, 2011 8:08 pm ] |
| Post subject: | Is this a good wheel for a slick? |
I just wanted to know from the guys with the drag wheels if this one is good. i know i will need a spacer if they will work but where do i get the spacers from? |
|
| Author: | slowdsm [ Fri Jul 15, 2011 8:10 pm ] |
| Post subject: | Re: Is this a good wheel for a slick? |
nothing there
|
|
| Author: | 89turbocoltsl [ Sat Jul 16, 2011 7:13 am ] |
| Post subject: | Re: Is this a good wheel for a slick? |
Haha its been a long week. http://cgi.ebay.com/ebaymotors/Bart-Whe ... 4cf86b6f2f |
|
| Author: | slowdsm [ Sat Jul 16, 2011 1:22 pm ] |
| Post subject: | Re: Is this a good wheel for a slick? |
the size is correct.. or even a 15x 7.5..depending on your slick size they look like they might be kinda heavy tho. I pulled this off that link. These wheels have a dual bolt pattern and are not DOT-approved. I dont like duel bolt patterns for slicks cause it weakens the center of the rim..but that could be just me thinking that. but that rim will fit and work Steve |
|
| Author: | 89turbocoltsl [ Sat Jul 16, 2011 3:50 pm ] |
| Post subject: | Re: Is this a good wheel for a slick? |
Ok thanks |
|
| Author: | Codeofdastreets [ Sun Sep 11, 2011 9:42 pm ] |
| Post subject: | Re: Is this a good wheel for a slick? |
Does a 13" rim fit on these cars??if so does weld/borgart/spunworks make a rim that is 4x114.3?? |
|
| Author: | RedTsi [ Sun Sep 11, 2011 10:24 pm ] |
| Post subject: | Re: Is this a good wheel for a slick? |
Quote: Does a 13" rim fit on these cars??if so does weld/borgart/spunworks make a rim that is 4x114.3??
I'm using old supra 13x8 wheels and they seem to do the work.
|
|
| Author: | Flying Eagle [ Mon Sep 12, 2011 7:08 am ] |
| Post subject: | Re: Is this a good wheel for a slick? |
14" factory alum rims barely squeeze over the factory turbo brakes. If you have NA brakes, then yes 13" is not a problem. Would be very surprised if 13" rims fit over the turbo brakes. |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|