4g61t.org

Specializing in the 3g CSM
It is currently Thu Mar 28, 2024 6:07 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Fri Jul 15, 2011 8:08 pm 
Offline
Newbie

Joined: Tue Sep 04, 2007 11:23 pm
Posts: 35
Location: New Jersey
I just wanted to know from the guys with the drag wheels if this one is good. i know i will need a spacer if they will work but where do i get the spacers from?


Top
   
PostPosted: Fri Jul 15, 2011 8:10 pm 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2141
Location: Tucson Az
nothing there :prayer:

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Top
   
PostPosted: Sat Jul 16, 2011 7:13 am 
Offline
Newbie

Joined: Tue Sep 04, 2007 11:23 pm
Posts: 35
Location: New Jersey
Haha its been a long week. http://cgi.ebay.com/ebaymotors/Bart-Whe ... 4cf86b6f2f


Top
   
PostPosted: Sat Jul 16, 2011 1:22 pm 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2141
Location: Tucson Az
the size is correct.. or even a 15x 7.5..depending on your slick size

they look like they might be kinda heavy tho.

I pulled this off that link. These wheels have a dual bolt pattern and are not DOT-approved.

I dont like duel bolt patterns for slicks cause it weakens the center of the rim..but that could be just me thinking that.

but that rim will fit and work

Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Top
   
PostPosted: Sat Jul 16, 2011 3:50 pm 
Offline
Newbie

Joined: Tue Sep 04, 2007 11:23 pm
Posts: 35
Location: New Jersey
Ok thanks


Top
   
PostPosted: Sun Sep 11, 2011 9:42 pm 
Offline
Member

Joined: Mon Jan 24, 2011 11:30 am
Posts: 58
Location: tampa florida
Does a 13" rim fit on these cars??if so does weld/borgart/spunworks make a rim that is 4x114.3??


Top
   
PostPosted: Sun Sep 11, 2011 10:24 pm 
Offline
Generic cool guy

Joined: Thu May 26, 2011 8:42 pm
Posts: 483
Location: Puerto Rico
Quote:
Does a 13" rim fit on these cars??if so does weld/borgart/spunworks make a rim that is 4x114.3??
I'm using old supra 13x8 wheels and they seem to do the work.

_________________
95' Talon Tsi AWD- 11.7@118
DSM vs Sti: http://youtu.be/0rBoxKxQvNQ
89' Mirage AWD swapped- 11.5@128 stock frame turbo
1989 Mirage Turbo AWD 11.5 @ 127: http://youtu.be/AhtJuKT-c5U


Top
   
PostPosted: Mon Sep 12, 2011 7:08 am 
Offline
The Silent Administrator
User avatar

Joined: Wed Dec 24, 2003 3:32 pm
Posts: 9524
Location: Ottawa, ON, Canada
14" factory alum rims barely squeeze over the factory turbo brakes. If you have NA brakes, then yes 13" is not a problem.
Would be very surprised if 13" rims fit over the turbo brakes.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited