4g61t.org

Specializing in the 3g CSM
It is currently Thu Mar 28, 2024 8:26 am

All times are UTC-05:00




Forum locked  This topic is locked, you cannot edit posts or make further replies.  [ 12 posts ] 
Author Message
PostPosted: Tue Mar 16, 2010 2:24 am 
Offline
CSM Junkie
User avatar

Joined: Mon Jun 26, 2006 1:48 am
Posts: 408
Location: Old Forge PA
Im just about done with my drum to disc rear brake conversion and I need these brackets to finish up the job. I got this pic from the archives to show exactly what I need.

Image

_________________
-'92 TSi AWD - Daily driver
-'93 TSi AWD - 4G64/HX35 build underway
-'89 Colt - 4G63 Swapped, Almost done!
-'86 Starion ESi-R - Someday 4G63 Swapped


Top
   
PostPosted: Tue Mar 16, 2010 7:17 am 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
1g fwd dsm ones will work too but you will have to redrill one of the lower holes to get them to bolt to a csm. I have a pair of those that you can have if you pay for shipping.

Also if you own a 91/92 car these are welded onto the rear axle beam, not bolted on like the 89/90 cars. In this case you will have to go another route.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
PostPosted: Tue Mar 16, 2010 7:54 am 
Offline
Some call me a god
User avatar

Joined: Fri Aug 15, 2008 2:19 am
Posts: 1629
Location: Tonawanda, NY
Have em.


Top
   
PostPosted: Tue Mar 16, 2010 8:50 pm 
Offline
CSM Junkie
User avatar

Joined: Mon Jun 26, 2006 1:48 am
Posts: 408
Location: Old Forge PA
Quote:
1g fwd dsm ones will work too but you will have to redrill one of the lower holes to get them to bolt to a csm. I have a pair of those that you can have if you pay for shipping.

Also if you own a 91/92 car these are welded onto the rear axle beam, not bolted on like the 89/90 cars. In this case you will have to go another route.
Yea mine is an 89 which all I "tried" to do was drill another hole below the original one but failed miserable. I got a nice blood blister on my finger as a result.

How much were you looking to get for those, Coltsfan? Im not really looking to spend a fortune but at the same time im not looking for freebies.

_________________
-'92 TSi AWD - Daily driver
-'93 TSi AWD - 4G64/HX35 build underway
-'89 Colt - 4G63 Swapped, Almost done!
-'86 Starion ESi-R - Someday 4G63 Swapped


Top
   
PostPosted: Wed Mar 17, 2010 12:38 am 
Offline
Some call me a god
User avatar

Joined: Fri Aug 15, 2008 2:19 am
Posts: 1629
Location: Tonawanda, NY
Make an offer. No reasonable one will be refused.


Top
   
PostPosted: Tue Mar 23, 2010 2:00 am 
Offline
CSM Junkie
User avatar

Joined: Mon Jun 26, 2006 1:48 am
Posts: 408
Location: Old Forge PA
Bump.

Under 15 dollars would be great. Not sure what these things are even worth. If nobody has them on here, than im just going to grab another set with the single holes and drill another hole (with the right size bit this time) and make that work.

_________________
-'92 TSi AWD - Daily driver
-'93 TSi AWD - 4G64/HX35 build underway
-'89 Colt - 4G63 Swapped, Almost done!
-'86 Starion ESi-R - Someday 4G63 Swapped


Top
   
PostPosted: Tue Mar 23, 2010 10:41 am 
Offline
Some call me a god
User avatar

Joined: Fri Aug 15, 2008 2:19 am
Posts: 1629
Location: Tonawanda, NY
$14.99 plus shipping?


Top
   
PostPosted: Tue Mar 23, 2010 6:47 pm 
Offline
CSM Junkie
User avatar

Joined: Mon Jun 26, 2006 1:48 am
Posts: 408
Location: Old Forge PA
Yea and whats shipping, 15 dollars? Like the 8 bolts that I needed that you wanted me to pay 25 dollars for? If I cant get these by the end of the week im re-drilling a set of 89 stock brackets.

_________________
-'92 TSi AWD - Daily driver
-'93 TSi AWD - 4G64/HX35 build underway
-'89 Colt - 4G63 Swapped, Almost done!
-'86 Starion ESi-R - Someday 4G63 Swapped


Top
   
PostPosted: Tue Mar 23, 2010 8:06 pm 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
You don't re-drill the csm brackets you re-drill the fwd dsm ones. Like I said, I have a pair laying around that you can have if you want them. That is, if you guys can't work out a deal on the original turbo brackets.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
PostPosted: Tue Mar 23, 2010 9:18 pm 
Offline
Some call me a god
User avatar

Joined: Fri Aug 15, 2008 2:19 am
Posts: 1629
Location: Tonawanda, NY
I garantee shipping would not be more than $5. They're pretty small.

You wouldn't have wanted those bolts anyway; it turned out one didn't match.


Top
   
PostPosted: Wed Mar 24, 2010 1:02 am 
Offline
CSM Junkie
User avatar

Joined: Mon Jun 26, 2006 1:48 am
Posts: 408
Location: Old Forge PA
Quote:
You don't re-drill the csm brackets you re-drill the fwd dsm ones. Like I said, I have a pair laying around that you can have if you want them. That is, if you guys can't work out a deal on the original turbo brackets.

The original 89 NT Colt brackets that I have look identical to the turbo brackets but there is only one hole on top instead of two. I tried drilling another hole below the original and ended up screwing up the brackets enough to the point where I didnt want to use them because the drill bit I used on the drill press was bent or something.

_________________
-'92 TSi AWD - Daily driver
-'93 TSi AWD - 4G64/HX35 build underway
-'89 Colt - 4G63 Swapped, Almost done!
-'86 Starion ESi-R - Someday 4G63 Swapped


Top
   
PostPosted: Wed Mar 24, 2010 9:08 am 
Offline
Moderator

Joined: Sat May 14, 2005 11:15 pm
Posts: 7515
Location: Stantonsburg, NC
I guess that would work but why not just use the dsm brackets? They have the metal hardlines and all, already installed. Only one hole to drill for the bottom mounting bolt. Even if you drill another hole in the csm bracket you still have to find a way to connect the two brake lines together.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual


Top
   
Display posts from previous:  Sort by  
Forum locked  This topic is locked, you cannot edit posts or make further replies.  [ 12 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited