4g61t.org
http://www.4g61t.org/forum/

92 Expo 4g64 SOHC ECU pin out
http://www.4g61t.org/forum/viewtopic.php?f=3&t=28409
Page 1 of 1

Author:  Natedog [ Mon Mar 23, 2009 4:40 pm ]
Post subject:  92 Expo 4g64 SOHC ECU pin out

Anyone have the stock manuals on these? I'd love to be able to get a copy of a few pages to see if the ECU pins out like a 4g15... It's rumored too... :)

Author:  joggle [ Sun Mar 29, 2009 9:27 am ]
Post subject:  Re: 92 Expo 4g64 SOHC ECU pin out

I have the manual. I will try and scan the MPI diagrams and post it this week. Are you thinking of a swap? :twisted:

Author:  Natedog [ Sun Mar 29, 2009 9:39 am ]
Post subject:  Re: 92 Expo 4g64 SOHC ECU pin out

I sure am! My daily would be loads of fun with a sohc 2.4.

Author:  HondaHunter [ Sun Mar 29, 2009 3:00 pm ]
Post subject:  Re: 92 Expo 4g64 SOHC ECU pin out

8 or 16 valve?

Author:  89Mirageman [ Sun Mar 29, 2009 3:12 pm ]
Post subject:  Re: 92 Expo 4g64 SOHC ECU pin out

92's were 8v

Author:  89Mirageman [ Tue Apr 21, 2009 7:22 pm ]
Post subject:  Re: 92 Expo 4g64 SOHC ECU pin out

Bumping this thread because I would like to know as well.

Author:  joggle [ Tue Apr 21, 2009 11:13 pm ]
Post subject:  Re: 92 Expo 4g64 SOHC ECU pin out

I completely forgot about this. :rolleyes: I will get it up this weekend. Harass me if I don't please!

Author:  89Mirageman [ Wed Apr 22, 2009 4:08 pm ]
Post subject:  Re: 92 Expo 4g64 SOHC ECU pin out

^^^^No problem man, I know you're busy. :P

Author:  HondaHunter [ Fri Apr 24, 2009 6:17 pm ]
Post subject:  Re: 92 Expo 4g64 SOHC ECU pin out

from what i remember the 8v 4g15 and 4g64 sohc have the same pinouts. i/m sure some connectors are different from what my visual memory serves me from thinking back to my dads old 91' Ram-50.

Author:  Natedog [ Sat Jun 27, 2009 10:04 am ]
Post subject:  Re: 92 Expo 4g64 SOHC ECU pin out

BUMP!

Author:  joggle [ Sun Jun 28, 2009 12:28 am ]
Post subject:  Re: 92 Expo 4g64 SOHC ECU pin out

Just under 3 months later. haha :o :wink:

http://www.4g61t.org/gallery/v/members/ ... +Wagon+92/

Let me know if you need any additional pages and how it looks as I will be starting this swap in the next month. :twisted:

Author:  tundabolt [ Fri Jul 10, 2009 5:02 pm ]
Post subject:  Re: 92 Expo 4g64 SOHC ECU pin out

thinking about doing this swap myself into a 94 lancer/mirage
was gonna use a dohc head from a 4g61t or 63t but this could work short term as well
plus being fwd i dont think i will need more than this for a couple mths

Author:  TurboSummit [ Sun Apr 11, 2010 1:14 pm ]
Post subject:  Re: 92 Expo 4g64 SOHC ECU pin out

I've done this swap about 7 years ago. It ended up running 12.7 at 106 at one point with a 16g. I did it using a 1g harness but if I had to do it over again, I would probably retain the factory harness, add the resister pack and waste spark coil/ignitor and use a 98-99 2g or Evo ecu.

Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/