4g61t.org

Specializing in the 3g CSM
It is currently Thu Mar 28, 2024 9:46 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Sun Mar 28, 2004 5:03 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Sun Apr 13, 2003 2:05 am
Posts: 313
Location: Los Angeles
Just installed the rear mount and I'm very happy. Reduced engine movement alot without NVH issues.

Install was not hard, but took a little longer than I expected.
After removing the 3 bolts that hold the mount I realized it wont come out without either dropping the crossmember it was bolted to or removing the bracket from the block. I removed the bracket from the block (just 2 bolts).

The rubber portion of the stock mount has steel sleave around it that need to come out before putting in the new inserts. I used a saw to cut thru one of the sides from the inside and then used a screwdriver and a hammer to colapse the metal sleave until it fell out.

The new insert slides right in, no press needed. Great mod for $35.


Top
   
 Post subject:
PostPosted: Mon Jun 07, 2004 2:02 am 
Offline
Member

Joined: Mon Mar 22, 2004 5:06 pm
Posts: 43
Location: ga
where did you buy the insert?
Thanks
alan


Top
   
 Post subject:
PostPosted: Sun Sep 12, 2004 8:54 pm 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Thu Jul 08, 2004 9:00 am
Posts: 228
Location: Ohio
ya both of my mounts (front and rear)are shot and i need a couple of them

_________________
1987 Dodge colt premier 4 door g32bt running!!!! 3speed automatics suck!


Top
   
 Post subject:
PostPosted: Sun Sep 12, 2004 9:34 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Sun Apr 13, 2003 2:05 am
Posts: 313
Location: Los Angeles
here

http://www.prostreetonline.com/pso/page ... %20Inserts

_________________
89 mirage 4g61t


Top
   
 Post subject:
PostPosted: Sun Sep 12, 2004 11:48 pm 
Offline
Member

Joined: Tue Dec 16, 2003 4:32 pm
Posts: 101
Location: Dallas Area
the front mount off a DSM does not fit -fyi

_________________
Corvette Beatin, Viper Eatin, SKEET-SKEET-SKEETIN...


Top
   
 Post subject:
PostPosted: Mon Sep 13, 2004 12:42 am 
Offline
Member

Joined: Sun Jul 21, 2002 1:50 pm
Posts: 112
Location: Cape Coral, Fl
Quote:
the front mount off a DSM does not fit -fyi
I just ordered 2 rear mounts they're the the same if you compare them. Thats what I use right now and it works great.

_________________
White 89 Mirage
4g63t - t3/t4 57/63, SFP manifold, tial gate, ex honed manifold, built head, 27x8x3 FMIC, 3in GM maf


Top
   
 Post subject:
PostPosted: Wed Mar 09, 2005 10:52 pm 
Offline
Member

Joined: Wed Oct 13, 2004 8:34 pm
Posts: 126
Location: Queens, NY
Dsm inserts don't work unless you cut them to fit.


Top
   
 Post subject:
PostPosted: Thu Mar 10, 2005 12:43 pm 
Offline
Some call me a god

Joined: Sat Jan 19, 2002 7:00 pm
Posts: 1529
Location: Denton, Tx
Quote:
Dsm inserts don't work unless you cut them to fit.

WRONG!!!


they actually do fit, you just have to find which ones do...

like 2 tranny mounts, 1 rear mount and the front is just a tiny insert (garbage) so just fill that one.

_________________
If speed kills, then i shoulda been dead awhile ago. There is no such thing as "Too Much Power". There is no excuse for a lost race. Do you view the rev limiter as a fun limiter?or as a shift point? And we all know, more boost=more fun.


Top
   
 Post subject:
PostPosted: Mon Apr 04, 2005 6:40 pm 
Offline
Member

Joined: Wed Oct 13, 2004 8:34 pm
Posts: 126
Location: Queens, NY
Not Wrong! The rubber part of the 61T mounts are smaller in diameter than those from a 63T. So What I had to do was cut the inserts to fit into the 61T mounts. I burned the whole rubber part out of the mount. I then cut the urethane mount to fit the hole, then stuffed it.


Top
   
 Post subject:
PostPosted: Tue Apr 05, 2005 11:51 am 
Offline
Some call me a god

Joined: Sat Jan 19, 2002 7:00 pm
Posts: 1529
Location: Denton, Tx
i used a rear dsm mount for the rear mount.

i used a dsm tranny mount for the timing belt mount and it will also fit the tranny mount.

the front i filled with urethane, due to the fact that the dsm little piddly inserts do not fit a csm mount.

basically, order 2 dsm tranny mounts, and 2 dsm rear mounts.

it will work for all 4 with no or VERY minimal tramming (i had to trim nothing)

freeze the urethane bushings and lube and squish in with a vice.

_________________
If speed kills, then i shoulda been dead awhile ago. There is no such thing as "Too Much Power". There is no excuse for a lost race. Do you view the rev limiter as a fun limiter?or as a shift point? And we all know, more boost=more fun.


Top
   
 Post subject:
PostPosted: Tue Apr 05, 2005 8:27 pm 
Offline
Member

Joined: Wed Oct 13, 2004 8:34 pm
Posts: 126
Location: Queens, NY
Freeze, lube and squish with a vice. Oops left those steps out. Still worked for me though.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 11 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited