4g61t.org http://www.4g61t.org/forum/ |
|
Wheels and tires... http://www.4g61t.org/forum/viewtopic.php?f=29&t=5877 |
Page 1 of 1 |
Author: | Starquest aka AndyR [ Fri Oct 24, 2003 4:06 pm ] |
Post subject: | Wheels and tires... |
post pics of your custom wheel and tire combos here. I would really like to see some nice 16" wheels and what they look like on the CSM. Also handy would be the weight of the wheels themselves, minus tires. I have some cheapo 15" pepboy american racing wheels on my mirage. I will try to find out some more info on them this weekend. |
Author: | 89 mirage evo [ Fri Oct 24, 2003 4:38 pm ] |
Post subject: | |
16" talon rims with 205/40 yokohamas the rear isnt supposed to have a wheel gap, its just that i parked on the driveway at an angle |
Author: | 89 mirage evo [ Mon Oct 27, 2003 1:45 am ] |
Post subject: | |
Author: | dragstr4g61t [ Sat Nov 01, 2003 6:46 pm ] |
Post subject: | |
http://wastemytime.net/OtherPeoplesShit ... mirage.jpg Here is a side shot of my car with 16X7 rims, 205/45 Firehawks. It's got the AWD springs and struts lowering it about 2". I rub a in the rear over large bumps but other than that its works good.[/img] |
Author: | Gage [ Sat Nov 01, 2003 10:32 pm ] |
Post subject: | |
Here are mine a set of nissan 240 sx wheels on goodyear 205/60/15's Pat |
Author: | Jeza [ Sun Nov 02, 2003 1:37 am ] |
Post subject: | |
http://community.webshots.com/photo/797 ... 9870ioQwXG Here's mine with 16" ROH rims, and the white one next to it has 17" tsw rims |
Author: | thehelldonkey [ Wed Mar 16, 2005 12:09 am ] |
Post subject: | |
i'll work on the picture thing, but i have the 15" [enkei] oz-branded wheels from a lancer oz rallly edition. they fit on w/o issue, already had the hole for the hub bolt. there is enough clearance for the 60 series tires from the lancer, too [if they're on there, at least roast them off!]. they look good, and though 18"s would be hip, 15" look PROPORTIONAL [a word missing from the vocabulary of most ricer kids]. and the brakes still fill up the wheels "prettily". |
Author: | Silforty element [ Sun Mar 27, 2005 2:56 pm ] |
Post subject: | |
i havn't done so yet...but im thinking about slapping on some good'o old school's and give it a little drift agression look. something like watanabe, enkei, SSR, and other mesh's with a dish. im leaning more into the SSR's though. |
Author: | bosco2023 [ Wed Oct 26, 2005 7:22 pm ] |
Post subject: | |
bump |
Page 1 of 1 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |