4g61t.org
http://www.4g61t.org/forum/

How To: Tachometer Fix 1992 4G63T Swap + 1990 Tach Filter
http://www.4g61t.org/forum/viewtopic.php?f=23&t=5614
Page 1 of 1

Author:  Ricehunter [ Tue Oct 07, 2003 11:44 pm ]
Post subject:  How To: Tachometer Fix 1992 4G63T Swap + 1990 Tach Filter

Just wanted to post the fix i found for the tach not working in my swap, don't know if it's been posted yet or not but here it is anyway. When i did my swap i used a 92 harness and coil packs ect, and a 90 ecu. Did the two wire swap on the ecu (air flow and idle switch.) and wired up the 15 pin and 4 pin connector, no problems. But tach didn't work as usual, because of the lack of a tach filter. Took the tach adaptor from a 90 coil pack (NT, turbo 1.6/2.0 all the same) here's a pic http://www.ecanfix.com/~mdhamilton/imag ... AGE002.jpg

Wire the two inputs red and white to the coils and send the yellow output wire to pin #3 (white) on the 15 pin connector (C-19). And now i have a tach. Hope that helps some one. 8)

Author:  HondaHunter [ Wed Oct 08, 2003 2:16 am ]
Post subject: 

i think this would help out alot of people who have a non-working tach :)

Author:  adamrx7 [ Wed Nov 10, 2004 9:37 pm ]
Post subject: 

Some of this might help too

http://www.ecanfix.com/~mdhamilton/ecuconversion.html

Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/