Specializing in the 3g CSM
It is currently Sat Feb 24, 2024 4:26 am

All times are UTC-05:00

Post new topic  Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Tue Oct 07, 2003 11:44 pm 
Spends Too Much Time Under The Hood

Joined: Mon Oct 28, 2002 10:33 am
Posts: 216
Just wanted to post the fix i found for the tach not working in my swap, don't know if it's been posted yet or not but here it is anyway. When i did my swap i used a 92 harness and coil packs ect, and a 90 ecu. Did the two wire swap on the ecu (air flow and idle switch.) and wired up the 15 pin and 4 pin connector, no problems. But tach didn't work as usual, because of the lack of a tach filter. Took the tach adaptor from a 90 coil pack (NT, turbo 1.6/2.0 all the same) here's a pic http://www.ecanfix.com/~mdhamilton/imag ... AGE002.jpg

Wire the two inputs red and white to the coils and send the yellow output wire to pin #3 (white) on the 15 pin connector (C-19). And now i have a tach. Hope that helps some one. 8)

 Post subject:
PostPosted: Wed Oct 08, 2003 2:16 am 
4g61t Delinquent
User avatar

Joined: Wed Dec 25, 2002 7:44 pm
Posts: 1740
Location: Hesperia, CA(In the Mojave desert)
i think this would help out alot of people who have a non-working tach :)

I own a CSM.
I live my life 1 repair at a time.
Nothing matters...not my crew...my bills, nor my friends drama...
For those 10 months or less... I'm broke...

 Post subject:
PostPosted: Wed Nov 10, 2004 9:37 pm 
CSM Expert
User avatar

Joined: Sat Nov 10, 2001 7:00 pm
Posts: 840
Location: St.Louis, MO, USA (In the middle)
Some of this might help too


93'FD Touring non-seq

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

All times are UTC-05:00

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Limited