| 4g61t.org http://www.4g61t.org/forum/ |
|
| Seatbelts not working http://www.4g61t.org/forum/viewtopic.php?f=22&t=40510 |
Page 1 of 1 |
| Author: | tek_88 [ Mon Jan 18, 2016 2:37 pm ] |
| Post subject: | Seatbelts not working |
Has anyone had any problems with their automatic seat belts? Mine stopped working a few days ago, I checked all fuses related and none were blown. What else would cause both seat belts to no longer operate? Car is a 1989 Mirage GT |
|
| Author: | slowdsm [ Mon Jan 18, 2016 5:37 pm ] |
| Post subject: | Re: Seatbelts not working |
there is a small silver box located in the center console just in front of the rear ashtray.. u need to remove the whole console to get to it..it might have came unplugged or just went bad. Steve |
|
| Author: | xxNocturnalxx [ Tue Jan 19, 2016 1:58 pm ] |
| Post subject: | Re: Seatbelts not working |
I have the same issue in my car, still need to swap that module as I've gone through everything else like you have. |
|
| Author: | tek_88 [ Tue Jan 19, 2016 9:16 pm ] |
| Post subject: | Re: Seatbelts not working |
Where would I find another module? Would one from a 1g tel work? |
|
| Author: | Flying Eagle [ Tue Jan 19, 2016 9:49 pm ] |
| Post subject: | Re: Seatbelts not working |
If someone takes a module to a TV/circuit/stereo repair place, there might be a chance of finding a common failure point with these modules. Caps and ISC/injector drivers on ECM's, so why not some simple output failure or switching issue? Can't be much logic to the little box. Wish there was a circuit diagram for them, much like old stereo boards and TV circuit boards. Specs help even more .... |
|
| Author: | tek_88 [ Sat Jan 23, 2016 11:10 am ] |
| Post subject: | Re: Seatbelts not working |
Maybe I will take the module apart and see if any things on it is burnt. Or convert to manual seat belt. |
|
| Author: | Flying Eagle [ Mon Feb 01, 2016 8:18 am ] |
| Post subject: | Re: Seatbelts not working |
Found a vid on YT. Click me Maybe it relates. Haven't watched it yet. |
|
| Author: | tek_88 [ Mon Feb 01, 2016 7:36 pm ] |
| Post subject: | Re: Seatbelts not working |
Thanks, I'll watch it when I get home. |
|
| Author: | Flying Eagle [ Tue Feb 02, 2016 12:04 pm ] |
| Post subject: | Re: Seatbelts not working |
One of our members posted pics of a burnt circuit board on FB. Best to open the affected unit and see what is up. Seems it will contain similar capacitors like the the ECU's. |
|
| Author: | xxNocturnalxx [ Tue Feb 02, 2016 1:50 pm ] |
| Post subject: | Re: Seatbelts not working |
^ Yep that was me, darn those caps. |
|
| Author: | tek_88 [ Wed Feb 03, 2016 11:49 am ] |
| Post subject: | Re: Seatbelts not working |
Quote: One of our members posted pics of a burnt circuit board on FB.
Yeah, I will be checking it out this weekend when I do the brakes.
Best to open the affected unit and see what is up. Seems it will contain similar capacitors like the the ECU's. |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|