4g61t.org

Specializing in the 3g CSM
It is currently Thu Mar 28, 2024 4:46 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Sat Oct 24, 2015 11:01 am 
Offline
The Silent Administrator
User avatar

Joined: Wed Dec 24, 2003 3:32 pm
Posts: 9524
Location: Ottawa, ON, Canada
Wondering if anyone else has this combination of parts in their car.

I have a GVR4 aluminum radiator on the way. Have a 1G 4g63t setup in the car, including a 1G water pipe that sits very close to the scatter shield.

The GVR4 upper hose position is offset to the right by an inch or two, of where the stock Colt/Mirage turbo hose is located.

Lower hose seems to be in the same spot.

Anyone have part numbers or pics of hoses that they used to make this or a similar combination work?

Not having a wall of hoses at the local parts stores, is running thin right now.


Top
   
PostPosted: Tue Oct 27, 2015 10:31 pm 
Offline
Some call me a god
User avatar

Joined: Mon Dec 26, 2005 2:20 am
Posts: 1154
Location: Anderson, IN
I had a gvr radiator in my car at one point, I think I 1g hoses or gvr4 ones.

_________________
92 Colt GL 4g63t + AWD swap
00 Mirage LS


Top
   
PostPosted: Wed Oct 28, 2015 6:40 pm 
Offline
Member

Joined: Fri Jun 12, 2015 9:25 am
Posts: 90
Location: new jersey
I currently have a complete 1g setup aluminum mishimoto rad, ebay Silicon hoses, and thermostat outlet. Its maybe an inch shorter in height compared to stock.Might be able to use the 2g top hose to get the gvr4 right


Top
   
PostPosted: Fri Dec 11, 2015 7:30 am 
Offline
Spends Too Much Time Under The Hood
User avatar

Joined: Fri Mar 22, 2013 2:25 am
Posts: 352
Location: Denver, Co
I have a gvr4 radiator on mine, top hose is from galant but I had to trim it to fit, bottom one is from elantra 1.8L

_________________
91' Mitsubishi Colt 4G67T FWD "The Minion" - 12.26@118
94' Mitsubishi Galant GS 4g63 Swap "White Unicorn"
95' Eagle Talon Tsi FWD "Ernie's car" - 13.92@104 *Rest In Parts*


Top
   
PostPosted: Fri Dec 11, 2015 12:41 pm 
Offline
The Silent Administrator
User avatar

Joined: Wed Dec 24, 2003 3:32 pm
Posts: 9524
Location: Ottawa, ON, Canada
Thanks guys!

I got a Galant lower (VR4 variant shouldn't matter) as they should all be the same with the 4g6x motor listing in that chassis.

Not sure what I have up top, but it may get re-used. DSM or Galant seems to be a consensus for top hoses. I may vary well have a DSM upper currently, trimmed to fit.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited