4g61t.org

Specializing in the 3g CSM
It is currently Thu Mar 28, 2024 5:57 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 13 posts ] 
Author Message
PostPosted: Tue Sep 23, 2014 7:55 pm 
Offline
Member
User avatar

Joined: Mon Sep 15, 2003 4:44 pm
Posts: 162
Location: Montreal, PQ, Canada
Hi,

I'm looking to replace my old OEM panhard with something more "ajustable".

Does someone know if a mustang (05-14) panhard bar fits ? Does it need to be cut (reduce the length) ?

Any comments, brand, model, review is welcome !

Summit Rcaing Panhard bar : http://www.summitracing.com/int/parts/s ... /overview/

Image

_________________
Dodge Colt 1992 4G63T -= Racing Car =-
Toyota Corolla S 2015 -= Daily Car =-
Mitsubishi Outlander V6 2009 -= Family Car =-


Top
   
PostPosted: Wed Sep 24, 2014 6:34 am 
Offline
The Silent Administrator
User avatar

Joined: Wed Dec 24, 2003 3:32 pm
Posts: 9524
Location: Ottawa, ON, Canada
Find out the diameter of the bolt sleeve they insert on either end of that part.

Next, you need to know the length from bolt hole to bolt hole, minimum setting and maximum.

This way you know if you have the range needed (well the minimum length with some adjustment) to be able to use the bar.

If the site does not mention these specifications, you will have to call, or do some IntarWeb searching on ..... dare I say it ..... Mustang Forums! :rock:


Top
   
PostPosted: Wed Sep 24, 2014 8:08 am 
Offline
Some call me a god
User avatar

Joined: Mon May 18, 2009 8:53 pm
Posts: 1494
Location: Seattle, WA
I'm very interested to see where this thread goes.

_________________
89 Mirage Billet 20g 63t 12.4@120 417whp 400wtq @ English Racing.
89 Colt GT E316g
06 Silverado SS
07 ZX6R


Top
   
PostPosted: Sat Sep 27, 2014 6:58 pm 
Offline
Member

Joined: Tue Apr 30, 2013 11:00 pm
Posts: 97
Location: Durham NC
I was using, until recently, an adjustable 1G panhard. It broke the other day on one of the ends, perhaps because it wasn't the right length (maybe too long or short, no idea?). Anyways, I didn't find any adjustable replacement online and even finding a new one was difficult. After not being able to get a new one from all the major part stores in town and the Mitsu dealer also not having them available, I found a new one on http://www.discountmitsubishiparts.com for 60 bucks. A cheap adjustable one would be nice, though.

_________________
89 Colt GT Turbo - Durham, NC


Top
   
PostPosted: Sun Sep 28, 2014 9:00 am 
Offline
Member

Joined: Mon Nov 12, 2012 11:54 am
Posts: 43
Location: New Harmony, IN
If you don't mind a little more noise, you could get a swedged tube and rod ends from speedways motors for less than above.


Top
   
PostPosted: Mon Sep 29, 2014 7:25 pm 
Offline
Member

Joined: Tue Apr 30, 2013 11:00 pm
Posts: 97
Location: Durham NC
Does anyone happen to know the length of the stock bar?

_________________
89 Colt GT Turbo - Durham, NC


Top
   
PostPosted: Sun Oct 26, 2014 8:07 pm 
Offline
Member
User avatar

Joined: Mon Sep 15, 2003 4:44 pm
Posts: 162
Location: Montreal, PQ, Canada
Here is the length :

DSM 1G FWD : center hole to center hole = 42 inch
CSM (89-92) : center hole to center hole = 42 3/4 inch

I did a search, but did not find the length of the mustang pan bar. Can anyone help me to find the length ?

_________________
Dodge Colt 1992 4G63T -= Racing Car =-
Toyota Corolla S 2015 -= Daily Car =-
Mitsubishi Outlander V6 2009 -= Family Car =-


Top
   
PostPosted: Sun Oct 26, 2014 9:13 pm 
Offline
The Silent Administrator
User avatar

Joined: Wed Dec 24, 2003 3:32 pm
Posts: 9524
Location: Ottawa, ON, Canada
You would have to ask someone with a Mustang, like on the forums for 05-14 models.

I searched and could not come up with a difinitive answer, sorry.

Most guys only need to know it's the correct part, and how to adjust it once it is in place.

You have to make sure the end pieces are the correct width to fit the CSM braces they bolt into.


Top
   
PostPosted: Sun Oct 26, 2014 10:15 pm 
Offline
Moderator
User avatar

Joined: Wed Jan 04, 2006 1:21 pm
Posts: 2141
Location: Tucson Az
contact there guys..and either buy the parts and make 1 urself.. or have them make one for you..


http://www.rodendsupply.com/


Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.


Top
   
PostPosted: Sat Jan 31, 2015 9:25 am 
Offline
Member
User avatar

Joined: Mon Sep 15, 2003 4:44 pm
Posts: 162
Location: Montreal, PQ, Canada
Well, last night I try another time to find the length.

here is the answer of Steeda (panhard bar for mustang) :

----------

Hi Guillaume,
There is about 3 inches of range of adjustment on the panhard bar.
So you could figure it would be at least 1.5 longer or shorter than stock.

Thank You,
Rod Williamson
Sales Associate
Extension 1117---
Steeda Autosports, Inc
http://www.steeda.com
1-800-950-0774

_________________
Dodge Colt 1992 4G63T -= Racing Car =-
Toyota Corolla S 2015 -= Daily Car =-
Mitsubishi Outlander V6 2009 -= Family Car =-


Top
   
PostPosted: Sun Apr 19, 2015 7:40 pm 
Offline
Member
User avatar

Joined: Mon Sep 15, 2003 4:44 pm
Posts: 162
Location: Montreal, PQ, Canada
On amazon, most of ajustable panhard bar for mustang are 46 inch.

http://www.amazon.com/Hotchkis-15102-Ad ... A5MFGECT7S

_________________
Dodge Colt 1992 4G63T -= Racing Car =-
Toyota Corolla S 2015 -= Daily Car =-
Mitsubishi Outlander V6 2009 -= Family Car =-


Top
   
PostPosted: Tue Jun 28, 2016 11:56 am 
Offline
Some call me a god
User avatar

Joined: Mon May 18, 2009 8:53 pm
Posts: 1494
Location: Seattle, WA
Here's more of a universal option. https://www.summitracing.com/parts/cee- ... fgodKCcCyQ

Anyone have any luck finding an adjustable that bolts on?

Although I think it would be easy enough to cut and shorten the Mustang bar, if length is the only issue.

_________________
89 Mirage Billet 20g 63t 12.4@120 417whp 400wtq @ English Racing.
89 Colt GT E316g
06 Silverado SS
07 ZX6R


Top
   
PostPosted: Wed Jul 13, 2016 9:32 am 
Offline
CSM Junkie

Joined: Mon Dec 10, 2007 9:00 am
Posts: 448
Location: Indianapolis
I think cusco has one not sure though will double check on it


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 13 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 28 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited